YIHENG TU-10 thermostatic metal bath heating type, temperature control 5~ 100 ℃
Temperature range RT + 5~ 100 ℃, heating rate ≤ 25min (20~100 ℃), cooling rate -, temperature control accuracy ≤ +/- 0.5 ℃, Temperature resolution 0.1 ℃, Temperature uniformity ≤ +/- 0.5 ℃, maximum Power 100W, Timer Range 99h59min.
YiHeng
TU-10
-
Honghua HH-600 digital display constant temperature Water Bath
$ 215.00 -
BOZHEN HH-8S Electrically-heated thermostatic Water Bath single row eight holes
$ 338.00 -
Honghua HH-1 high-grade anti-dry burning digital display constant temperature Water Bath, single hole
$ 162.00 -
HUXI high temperature Dry Bath optional module HX07 16.5mm aperture * 12 holes
$ 142.00 -
HUXI high temperature Dry Bath optional module HX05 13.5mm aperture * 24 holes
$ 142.00
Introduction
The constant temperature Dry Bath is a Dry Bath device controlled by a microcomputer to replace the traditional Water Bath device. It can be widely used in sample preservation and reaction, DNA amplification and pre-denaturation of electrophoresis, serum coagulation, etc.
Features
● Microcomputer temperature controller, accurate and reliable temperature control, and display real-time temperature and constant temperature countdown time at the same time.
● The metal module is used to prevent the sample from contamination.
● Metal modules can be easily replaced, cleaned and disinfected.
● Fan cooling, cooling down quickly, built-in over-temperature protection device, more reliable use.
● Temperature deviation calibration, buzzer alarm prompt after running.
● Transparent cover to prevent experimental errors, automatic fault detection and alarm function.
YiHeng TU-10 Thermostatic metal bathSpecifications
| LIST | VALUE |
|---|---|
| Temperature range | RT+5~100°C |
| Heating rate | ≤25min(20~100℃) |
| Cooling rate | - |
| Temperature control Accuracy | ≤±0.5℃ |
| Temperature Resolution | 0.1℃ |
| Temperature Uniformity | ≤±0.5℃ |
| Maximum power | 100W |
| Timer | 99h59min |
YiHeng TU-10 Thermostatic metal bath Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.