JFL Qxp 0-50 ISO Grindometer single-channe 0~50μm

The JFL ISO Grindometer Qxp 0-50 is a single-channe Fineness Gauge with a range of 0 to 50 microns and a recommended range of 15 to 40 μm. The Qxp 0-50 Grindometer is used to test the impurity particle fineness of pigments in Paints and paint pulps.

Brand

SKU: NB024716

JFL

Model

QXP 0-50

Get Quote

JFL shop

Information

Datasheet Video Manual

What else did others buy

TRUIT TR 1201/015 single-channe Coating Fineness gauge 0~15μm

$ 165.00
TQCVF2124 double-channel fineness grindometer 0-500µm

$ 1524.00
TQCsheen VF2142 wide-channel Fineness gauge Range 0~5000μm

$ 1698.00
Pushen 0-15um single-channe small Fineness gauge (single-channe) detects the Fineness of Coatings, inks and other particles

$ 192.00
TRUIT TR 1202/015 double-channel Fineness ruler 0~15μm

$ 187.00

Genuinegoods

JFL QXP 0-50 GrindometerOverview
Specifications
Comments
FAQs

QXP 0-50

Grindometer

Introduction

Jinfulun Qxp scraper Fineness Meter is manufactured in accordance with the relevant regulations of international standards ISO1524 and GB/T 1724-2019. It is used to measure the particle fineness of paint and related products. The scraper fineness is divided into single groove and double groove. .

Product Usage

The ink fineness plate is used to determine the fineness of pigments and impurities in paints and paint slurries.

Range selection

When the fineness is below 30um, an ink fineness plate with a measuring range of 50um should be used; when the fineness is above 30um, an ink fineness plate with a measuring range of 100um or 150um should be used.

plan

Jinfulun ISO scraper Fineness Meter Qxp 0-50

JFL QXP 0-50 GrindometerSpecifications

LIST	VALUE
range	0~50μm
Graduation	5µm
Scraper type	Single-channe
Number of grooves	1
Scale unit	μm
Scraper size	175mm65 mm13mm
Groove size	140*12.5mm
Drawdown blade size	90406mm
scraper material	stainless steel
Drawdown blade material	stainless steel
Applicable standards	ISO1524、GB/T 1724-2019
Calibrated Certificate	without
Recommended range	15~40μm

JFL QXP 0-50 Grindometer Packing list

Fineness Gauge X1, manual X1, certificate X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Can the Fineness of this scraper test the emulsion paint system?

[A]

Fineness of emulsion paint is about 40-50um, it is recommended to use 0~ 100 range Fineness gauge

[Q]

Which Pigment Fineness Test? Sample 10 g Printing ink pigments

[A]

Is there any estimated Fineness? Generally Printing ink Fineness is relatively small

[Q]

Can all Fineness of Ground Gauges be tested in the JT/T821.3 standard?

[A]

Not necessarily, but this QXP 0-50 Fineness of Ground Gauge can be considered.

[Q]

Fineness of the sample I want to measure is around 45 microns, should I choose 0~ 50 μm or 0~ 100 μm?

[A]

Hello, if you want to measure 45μm with this Fineness gauge, it is recommended that you choose 0~ 100μm or 0~ 150μm, which will be more suitable for you.

[Q]

Scraper Fineness meter one path, to meet the ISO1524 standard, which is Jinfulun?

[A]

Hello, Jinfulun's QXP Fineness meter is ISO standard. What is the Fineness range of microns you want?

+JFL QXP 0-50 Grindometer Big data

+JFL QXP 0-50 GrindometerSimilar products

+JFL QXP 0-50 GrindometerKnowledge

+JFL QXP 0-50 GrindometerStandard

+Navigation