LINSHANG LS181 Solar Film Tester
The UV peak wavelength of LINSHANG LS181 solar film Tester is 365nm, the visible peak wavelength is 550nm, the infrared peak wavelength is 950nm, the resolution is 0.1%, the Measurement accuracy is better than +/- 2% (colorless uniform light-transmitting substance), the factory standard sample detection is better than +/- 1%, the test slot size is 47mm wide × 91mm deep.
LinShang
LS181
LS182
-
INESA SGW-800L light transmitance haze Tester, closed sample compartment
$ 1003.00 -
AMITTARI AT-175P Portable Transmittance meter with Bluetooth printer
$ 467.00 -
Hypertherm TGL-18 Transmittance meter light transmitance analyzer
$ 366.00 -
LINSHANG LS110H split solar film Tester
$ 375.00 -
DUBAN DB22-TM271D Measurement range 0.00 OD - 6.00 OD
$ 649.00
Introduction
LS181 solar film Tester is suitable for automotive window film transmittance detection and ultraviolet infrared barrier rate testing, parallel optical path design, and the test data is not affected by the position of the sample, which is a high-precision automotive film Detector. The test principle of LS181 solar film Tester is to use ultraviolet light source, visible light source and infrared light source to irradiate the measured transparent substance, and the sensor detects the incident light intensity of the three light sources and the light intensity after passing through the measured transparent substance, and the ratio of the transmitted light intensity to the incident light intensity is the transmittance, which is expressed as a percentage. Most solar films are marked with visible light transmittance index, infrared and ultraviolet light are marked with blocking rate index, blocking rate = 100% - transmittance. The LS181 solar film Tester directly measures and displays the blocking rate of ultraviolet rays, the blocking rate of infrared rays and the transmittance of visible light for easy reading and understanding.
Features
1. Ultraviolet blocking rate, infrared blocking rate, visible light transmittance meter (transmittance meter) three-in-one.
2. Parallel optical path design, the test data is not affected by the position of the sample test, and the thickness of the material is also accurate.
3. 5V power supply, and USB interface, can be directly connected to 5V power supply.
4. It is suitable for testing the transmittance (barrier rate) of automotive film, explosion-proof film, architectural film, heat insulation film, film glass, etc.
5. The instrument has a real-time dynamic self-calibration function, which is automatically calibrated after powering on.
6. It is suitable for solar film performance exhibition, production, quality inspection, inspection and other occasions.
7. Easy to operate, fast measurement, just put the analyte into the test cell, and immediately display the three test results at the same time.
8. Complimentary support rod, support oblique reading is more convenient.
9. Patented product, patent number: 201320406828.8.
Series selection
type | Model | Visible wavelength | Ultraviolet wavelength | Infrared wavelength | Power supply mode | remark |
Classic portable | LS160 | 530nm | 365nm | 940nm | Powered by No. 7 battery | Only thin films can be tested, and it is recommended to test heat-absorbing films |
LS160A | 530nm | 365nm | 1400nm | It is recommended to test films with good reflective properties, such as metal films and ceramic nanofilms | ||
New portable | LS162 | 380nm~760nm | 365nm | 940nm | It can test film, film glass, car side gear, and it is recommended to test heat absorption film | |
LS162A | 380nm~760nm | 365nm | 1400nm | It is recommended to test films with good reflective properties, such as metal films and ceramic nanofilms | ||
High-precision desktop type | LS101 | 380nm~760nm | 365nm | 940nm | 5V power supply, can be connected to 5V power supply | High precision, it is recommended to test the endothermic film |
LS180 | 550nm | 365nm | 1400nm | For high precision, it is recommended to test films with good radioactive properties, such as metal films and ceramic nanofilms | ||
LS181 | 550nm | 365nm | 950nm | High precision, it is recommended to test the endothermic film | ||
LS182 | 550nm | 365nm | 950nm | High accuracy, SHGC test, suitable for testing any type of membrane | ||
1400nm | ||||||
Full infrared band | ||||||
Split mobile type | LS110A | 550nm | 365nm | 950nm | Powered by rechargeable lithium battery | Wireless split, can be used to test automotive front glass, architectural glass, etc |
LS110H | 550nm | 365nm | 1400nm |
LinShang LS181 Solar film TesterSpecifications
| LIST | VALUE |
|---|---|
| UV peak wavelength | 365nm |
| peak wavelength of visible light | 550nm |
| Infrared peak wavelength | 950nm |
| Resolution | 0.1% |
| Measurement Accuracy | ±2% |
| Test slot size | Width 47mm × Depth 91mm |
| Weight | ≈590g |
| Host size | 216*134*29mm |
| Power Supply | 5V AC/DC Power Supply, can also be powered by mobile Power Supply (optional) |
LinShang LS181 Solar film Tester Packing list
Solar film tester x1, certificate of conformity x1, manual x1, warranty card x1, 5V power adapter x1, instrument support column x1, engineering box size 34 * 29 * 9 (length * width * height) x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
