LINSHANG LS108D Lens Transmittance Tester

Introduction

 LS108D lens transmittance measuring instrument is specially used for mobile phone lens transmittance test, as well as IR hole infrared transmittance test, the instrument test aperture is 0.5mm, can test 550nm transmittance and infrared 850nm, 940nm transmittance. The instrument has a real-time dynamic self-calibration function, which is automatically calibrated to 100% transmittance after powering on, and the test aperture of this mobile phone lens Tester is very small, and the application range is very wide. In 2018, the LS108D lens transmittance measuring instrument was upgraded and computer software was given as a gift, which can realize functions such as automatic counting, automatic judgment of qualified and unqualified products, etc. The test principle of the instrument is that the light source irradiates the measured transparent substance, and the sensor detects the incident light intensity of the three light sources and the light intensity after passing through the measured transparent substance, and the ratio of the transmitted light intensity to the incident light intensity is the transmittance, which is expressed as a percentage.

Features

1. The minimum test hole size is ¢0.5mm, and the IR hole of the mobile phone with an aperture greater than 0.5mm can be measured.

2. Each of the three test holes has alignment indicator LEDs for alignment of the holes of the mobile phone lens during the test.

3. Stainless steel desktop design, exquisite appearance, conducive to the placement of the measured object, easy to operate.

4. The instrument has a real-time dynamic self-calibration function, which is automatically calibrated to 100% transmittance after powering on.

5. On the stainless steel table, glue and fix a lens positioning piece, which is convenient for batch testing of lenses on the production line.

6. The instrument has a USB interface, free computer software, complete the production testing process of the test quantity, pass rate, pass and fail judgment and other functions, please refer to the attached U disk in the software and software operation manual.

7. Switchable function between fast measurement and slow measurement: fast measurement function is suitable for batch inspection with positioning device on the production line, which can greatly improve production efficiency, slow measurement is more suitable for manual alignment of test holes, the light source flicker is slower, and the test holes can be better seen and aligned.

Lens transmittance tester x1, certificate of conformity x1, manual x1, warranty card x1, aluminum box x1, DC5V power adapter x1, computer software U disk x1, USB extension cable x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.