Linshang LS220 film instrument, paint Thickness Gauge

Introduction

LS220 is a magnetic and eddy current dual-purpose paint film meter. It is suitable for the measurement of non-magnetic coatings such as paint, varnish, enamel, chromium, and galvanized coatings on ferromagnetic metal substrates such as steel. It can also be used for copper, aluminum, die-cast zinc, yellow Measurement of non-conductive coatings such as paints, anodized layers or ceramics on non-magnetic metal substrates such as copper. It is especially suitable for the thickness detection of automotive paint coatings.

LS220 Paint Film Meter is a coating Measurement Instrument integrated with host and probe, which is very portable. The paint film meter only needs 0.5 seconds to complete a measurement, and does not need to be calibrated, and the operation is very simple.

LS220 paint film meter meets the standards:

DIN EN ISO 2808 Determination of film thickness of paints and varnishes.
　　JJG-818-2005 Verification Regulations for Magnetic and Eddy Current Overlay Thickness Measuring Instruments.
　　GB/T 4956-2003 Measurement of thickness of non-magnetic coating on magnetic substrate - Magnetic method.
　　GB/T 4957-2003 Thickness measurement of non-conductive coating on non-magnetic base metal - eddy current method.

Features

1. The ruby probe is used, which has strong corrosion resistance and wear resistance, ensuring long-term effective use of the instrument.

2. The instrument does not need to be calibrated, it only needs to be zeroed, and the measurement can be started after the zeroing is completed. Single button, easy to operate.

3. It has the function of temperature compensation and digitization of analog signal end to ensure the stability of sensor signal of paint film meter.

4. It has three measurement modes: iron-based measurement (Fe), non-ferrous-based measurement (NFe) and automatic identification (Fe/NFe).

5. Dual-purpose probes can automatically identify the measurement substrate and can be quickly and automatically switched.

6. It can measure the thickness of the non-magnetic coating layer on the magnetic metal substrate such as iron and steel, and the thickness of the non-conductive coating layer on the non-magnetic metal substrate such as copper and aluminum.

Film instrument x1, Fe zero adjustment board x1, NFe zero adjustment board x1, standard sheet x1, cloth Encasement bag x1, 1.5V AAA alkalinity battery x2, carton size 18 * 10 * 6 cm (length * width * height) x1, certificate of conformity x1, manual x1, warranty card x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.