Linshang LS220H Coating Thickness Gauge

Introduction

LS220H is a professional instrument for testing the coating thickness on the surface of materials. It is more suitable for commodity inspection, manufacturers and other places. The instrument adopts the magnetic measurement method and the eddy current measurement method, which can detect the thickness of the non-magnetic coating on the ferromagnetic metal substrate and the thickness of the non-conductive coating on the non-magnetic metal substrate, and has an automatic identification function. The instrument can automatically display and Measure the substrate.

LS220H Coating Thickness Gauge complies with various national standards and can ensure that it passes the inspection of the National Metrology Institute:

1. GB/T 4956-2003 Thickness measurement of non-magnetic coating on magnetic substrate - magnetic method.

2. GB/T 4957-2003 Thickness measurement of non-conductive coating on non-magnetic base metal - eddy current method.

3. DIN EN ISO 2808 Determination of film thickness of paints and varnishes.

4. JJG-818-2005 Verification Regulations for Magnetic and Eddy Current Overlay Thickness Measuring Instruments.

Features

1. The measurement is fast, the pressure is measured immediately, and the operation is simple and convenient. It only takes 0.5s to complete a test.

2. Iron-aluminum dual-purpose probe, using the Hall effect and eddy current effect, can measure the thickness of the non-magnetic coating layer on the magnetic metal substrate such as iron and steel, and the non-conductive coating layer on the non-magnetic metal substrate such as copper and aluminum. thickness. And it can automatically identify the measurement substrate and prompt to switch the measurement mode.

3. It complies with a number of national standards and can ensure that it passes the inspection of the National Institute of Metrology.

4. With temperature compensation function, the test data is stable, and the accuracy is not affected by temperature.

5. The coating Thickness Gauge does not need cumbersome calibration, it only needs a simple zero adjustment, and the test is more accurate after zero adjustment.

Coating thickness gauge x1, Fe zero plate x1, NFe zero plate x1, standard sheet x1, 1.5V AAA alkalinity battery x2, certificate of conformity x1, manual x1, warranty card x1, engineering box size 23 * 18 * 4.5 cm (length * width * height) x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.