LINSHANG UVCLED probe
LINSHANG UVCLED probe Light spectrum Response 200nm-400nm, suitable for 220nm-320nm LED sterilization lamp test, Power Measurement range 0 -200000μW/cm2, Power resolution 0.1μW/cm2, Energy Measurement range 0 - 9999999μJ/cm2, Recording time 0 - 99999S, Measurement accuracy +/- 10%, sampling speed 6 times/second.
LinShang
UVCLED
Introduction
There are two kinds of UVC light sources, one is the traditional low-pressure mercury lamp sterilization, and the other is the UVC LED lamp sterilization, compared with the low-pressure mercury lamp, the LED lamp has a longer service life, more energy saving and higher efficiency. Since the spectral curve of the low-mercury germicidal lamp is not the same as that of the LED germicidal lamp, the probes used are also different.
UVC LED probe is a digital probe developed by Linshang Technology for UVC LED light source, which is one of the 9 probes of LS125 ultraviolet irradiance meter, and the response wavelength of the probe is 200nm-400nm, which is suitable for the intensity and energy detection of high-power germicidal lamps of 220nm-320nm.
Spectral response curve of UVC-LED probe of ultraviolet irradiance meter:
Probe features:
1. UVC LED light source special ultraviolet intensity Detector.
2. Large range measurement, the maximum power can be measured to 200000μW/cm2.
3. The instrument can measure both energy and power values at the same time.
4. It has rich statistical functions, real-time power value, maximum value, minimum value, average value, measurement time, and energy value are displayed at the same time.
5. It can switch between 3 measurement units, namely μW/cm2, mW/cm2, W/m2, and data conversion between different units, without manual calculation
LS125 multi-probe ultraviolet irradiance meter, using digital probe, plug-in design, one host can match a variety of probes, the instrument intelligently judges the model of the probe, according to the test of ultraviolet spectrum range, range, size of the measuring hole, application industry, etc., 9 different ultraviolet probes have been developed, each probe selection refers to the following figure:
Probe model | Spectral response | Application |
UVC | 230nm-280nm | 254nm high-power ultraviolet germicidal mercury lamp intensity and energy test |
UVC-WP | 230nm-280nm | Water treatment 254nm germicidal mercury lamp intensity and energy test, waterproof 1 meter deep |
UVC LED | 200nm-400nm | 220nm-320nm LED light source intensity and energy test |
UVB | 280nm-315nm | 297nm, 308nm, 313nm and other UVB light source intensity and energy testing |
UVA | 315mn-400nm | UV curing, high-pressure mercury lamp intensity and energy testing |
UVA -X1 | 260nm-400nm | Ultraviolet aging chamber, ultraviolet intensity and energy testing in solar rays |
UVA LED | 340nm-420nm | UV curing, UVA LED flood light intensity and energy testing |
UVA LED - X1 | 340nm-420nm | UV curing, UVA LED spot light source intensity and energy testing |
UVA LED - X3 | 340nm-420nm | Intensity and energy testing of low-power UVA LED light sources |
LinShang UVCLED probeSpecifications
| LIST | VALUE |
|---|---|
| Light spectrum Response | 200nm-400nm, suitable for 220nm-320nm LED sterilization lamp test |
| Power Measurement range | 0~200000 μW/cm2 |
| Power resolution | 0.1 μW/cm2 |
| Measurement range | 0 - 9999999μJ/cm2 |
| record time | 0 - 99999S |
| Measurement Accuracy | ±10 % |
| Sampling rate | 6 times/second |
| Optional unit | μW/cm2 (默认)，mW/cm2，W/m2 |
| Test hole diameter | Φ10mm |
| Sensors size | Φ46*16.5mm |
LinShang UVCLED probe Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.