LINSHANG UVA LED-X1 Probe
LINSHANG UVA LED-X1 probe Light spectrum Response 340nm-420nm, instrument calibrated to 395nm LED Light source, Power Measurement range 0 -20000 mW/cm2, Power resolution 1 mW/cm2, Energy Measurement range 0 - 9999999mJ/cm2, Recording time 0 - 99999S, Measurement accuracy +/- 10%, sampling speed 2048 times/second.
LinShang
UVA LED-X1
Introduction
LED point light source is mostly used in the curing industry and exposure industry, because the spot light source is small, so it is necessary to use ultraviolet irradiatIon Meter with ultra-small aperture diameter to detect its intensity and energy. The UVA LED-X1 probe is one of the nine probes of the LS125 ultraviolet irradiator, with a spectral response range of 340nm-420nm and an aperture diameter of 1mm, which is suitable for intensity and energy detection of LED point light sources.
Ultraviolet Irradiance Meter UVA LED-X1 Probe Spectral Response Curve:
Probe features:
1. 1mm ultra-small test aperture, suitable for the intensity and energy test of 340nm-420nm LED point light source.
2. The instrument can measure both energy value and power value at the same time.
3. With rich statistical functions, real-time power value, maximum value, minimum value, average value, measurement time, and energy value are displayed at the same time.
4. It can switch between 3 measurement units, namely mW/cm2 (default), W/cm2, W/m2 and different units without manual calculation.
LS125 multi-probe ultraviolet irradiance meter, using digital probe, plug-in design, one host can match a variety of probes, the instrument intelligently judges the model of the probe, according to the test of ultraviolet spectrum range, range, size of the measuring hole, application industry, etc., 9 different ultraviolet probes have been developed, each probe selection refers to the following figure:
Probe model | Spectral response | Application |
UVC | 230nm-280nm | 254nm high-power ultraviolet germicidal mercury lamp intensity and energy test |
UVC-WP | 230nm-280nm | Water treatment 254nm germicidal mercury lamp intensity and energy test, waterproof 1 meter deep |
UVC LED | 200nm-400nm | 220nm-320nm LED light source intensity and energy test |
UVB | 280nm-315nm | 297nm, 308nm, 313nm and other UVB light source intensity and energy testing |
UVA | 315mn-400nm | UV curing, high-pressure mercury lamp intensity and energy testing |
UVA -X1 | 260nm-400nm | Ultraviolet aging chamber, ultraviolet intensity and energy testing in solar rays |
UVA LED | 340nm-420nm | UV curing, UVA LED flood light intensity and energy testing |
UVA LED - X1 | 340nm-420nm | UV curing, UVA LED spot light source intensity and energy testing |
UVA LED - X3 | 340nm-420nm | Intensity and energy testing of low-power UVA LED light sources |
LinShang UVA LED-X1 probeSpecifications
| LIST | VALUE |
|---|---|
| Light spectrum Response | 340Nm-420nm, instrument calibrated to 395nm LED Light source |
| Power Measurement range | 0~20000 mW/cm2 |
| Power resolution | 1 mW/cm2 |
| Measurement range | 0 - 9999999mJ/cm2 |
| record time | 0 - 99999S |
| Measurement Accuracy | ±10 % |
| Sampling rate | 2048 times/second |
| Optional unit | mW / cm2 (), W / cm2, W / m2 |
| Test hole diameter | Φ1mm |
| Sensors size | 39*32*15mm |
LinShang UVA LED-X1 probe Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.