JINGQI MHP-160 Mold Incubator 160L
JINGQI MHP-160 Mold Incubator Temperature range 5 -50 ℃, Temperature uniformity 1 ℃, Temperature Fluctuation +/- 0.5 ℃, Temperature resolution 0.1 ℃, liner material stainless steel plate, volume 160L, shelf (standard) 3, Power supply Voltage 220V, 50Hz, outer box material is good thin steel plate, Power consumption 500w.
JingQi
MHP-160
Features
Microcomputer intelligent control, with monitoring, temperature control and protection functions;
The refrigeration system adopts professional refrigeration technology, and the cooling effect is good, and the four corners of the inner tank are semi-circular arcs;
Simultaneous display of two temperatures, set and measured, can directly observe the two temperatures inside and outside the box;
Low temperature compensation function can improve the temperature control accuracy when working at low temperature;
The box is equipped with an ultraviolet germicidal lamp, which can observe the culture in the box;
Stainless steel liner, will not corrode.
Series
| model | volume | power | Carrier |
| MHP-100 | 100L | 300w | 3 |
| MHP-160 | 160L | 500w | 3 |
| MHP-250 | 250L | 800w | 3 |
| MHP-300 | 300L | 1000w | 4 |
| Other parameters | |||
| Cooling System | optional | ||
| ambient temperature | 5 -35°C | ||
| temperature range | 5 -50°C | ||
| temperature resolution | 0.1°C | ||
| temperature uniformity | 1°C | ||
| temperature fluctuation | ± 0.5°C | ||
| power supply | -220V 50Hz | ||
| Timer Range | 1-9999min | ||
JingQi MHP-160 Mold IncubatorSpecifications
| LIST | VALUE |
|---|---|
| Temperature range | 5~50℃ |
| Temperature Uniformity | 1℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature Resolution | 0.1℃ |
| Liner material | stainless steel plate |
| Volume | 160L |
| Shelf (std.) | 3 |
| Power | 220V、50Hz |
| Enclosure Material | Good sheet steel |
| Power consumption | 500w |
JingQi MHP-160 Mold Incubator Packing list
Host x1, shelf x3, instruction manual x1, certificate x1, warranty card x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
