Pushen PS 2658 Pull-out adhesion Tester

The pull-out adhesion Tester is a portable adhesion Tester that uses the hydraulic pull-out force of the adhesion Tester to peel off the coating from the coated substrate per unit area.

It is used in laboratories and workshops, with a single measurement range of 0-3000p in Ps and MPa through the LCD

Strong adhesion, waterproof and dustproof, and a good hose with a length of 15 meters can be used to measure relatively narrow areas

main performance

• Portable design, built-in rechargeable lithium battery, no external power supply, suitable for field and laboratory use

• Standard Micro-USB interface, after connecting with the computer, the instrument is similar to a U disk, which can directly copy the stored experimental data without installing any software, and is easy to use;

• The machine has a built-in real-time clock, and all saved data has a corresponding experimental date and time; it is convenient for users to summarize and manage experimental data;

• For products with different bonding strengths, the pull-off spindle sizes are 10, 14, 20 and 50mm, which expands the functionality and resolution of the instrument

• Each instrument is factory calibrated with NIST traceable pressure transducers to an accuracy of ±1% of full scale

• Internal storage of pull-off data, including maximum pull-off force, pull-off rate, test time and pull-off spindle size

• The pull-off rate display makes it easier for the operator to observe and adjust the pull-off rate, in line with international standard test methods

• Select pull-off unit size, change units of measure or store readings at the touch of a button

• No need for conversion tables, the instrument automatically calculates the pull-off force according to the size of the pull-off unit

• The pull-off unit uses inexpensive and high-quality aluminum spindles that meet international standards

• The aluminum self-centering pull-off unit ensures that the pull-off force acts on the test surface evenly when testing on smooth or uneven surfaces, preventing single-sided pull-off.

• High-grade industrial pressure sensors ensure continuity of accuracy

• LCD display, with two units of MPa or psi

Standards

GB/T5210

lSO4624, 16276-1

ASTMD4541, D7234

Principle

The test sample or system is applied in a uniform thickness to a flat plate with a uniform surface structure. After the coating system has dried/cured, the test post is bonded directly to the coated surface with a special adhesive. After the adhesive is cured, put the bonded test combination on the PS2658 digital display pull-off adhesion Tester. The Tester pulls the test column from the coating uniformly and at a speed not exceeding 1MPa/s through the hydraulic pump. The required force is directly displayed through the LCD of the instrument, so as to test the force required to break the adhesion between the coating/substrate.

It is worth noting that the test results are expressed by the tensile force between the failure interfaces (adhesive failure) or the tensile force of self-destruction (cohesive failure), and the adhesion/cohesive failure may occur simultaneously.

Puller X1, 20mm Spindle X20, Sleeve Cutter X1, Epoxy Adhesive X1, Operation Manual, Product Certificate

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.