BOZHEN LRH-250F Biochemical Incubator Fluorine-free
BOZHEN LRH-250F Biochemical Incubator Temperature range 4~ 60 ℃, Temperature fluctuation +/- 0.5 ℃, temperature resolution 0.1 ℃, good liner material stainless steel, liner size 520 × 460 × 405mm, shelf (standard) 3 pieces. LRH-250F is a fluorine-free Biochemical Incubator,
BoZhen
LRH-250F
-
RONGHUA DNP-9052-1A electrothermal Thermostatic Incubator
$ 388.00 -
SANFA SHP-800E Biochemical Incubator touch 800L
$ 5114.00 -
JINGQI DNP-9272 Electric Thermostatic Incubator stainless steel
$ 850.00 -
Hengli WS-150MJ Mold Incubator 150L
$ 2410.00 -
Hengli PX-130 Precision LCD Screen Constant Temperature Incubator 130L
$ 1171.00
Introduction
The new fluorine-free design of the experimental equipment uses international brand compressors and circulating fans, super large LCD, easy operation, high efficiency and low energy consumption. It not only promotes energy saving, but also has a long service life, and can reduce noise to a lower limit. Compared with traditional low-temperature equipment, the cooling time is reduced by more than 40%.
concept of use
It is suitable for environmental protection, sanitation and epidemic prevention, drug inspection, agricultural livestock, aquatic products and other research, colleges, production departments, water body analysis and BOD determination, bacteria, mold, microbial cultivation, preservation, plant cultivation, and breeding experiments. Special constant temperature equipment.
Features
1. Adopt high-quality mirror stainless steel liner, the box body is made of high-quality steel plate sprayed with plastic, the four corners are semi-circular, easy to clean, and the distance between the partitions in the box can be adjusted.
2. Intelligent digital display thermostat, easy to understand, easy to observe and operate.
3. Equipped with international professional fuzzy PID intelligent temperature controller, small fluctuation, with timing function (0-9999min)
4. Equipped with an independent temperature limit alarm system, it will be automatically interrupted when the temperature exceeds the limit, so as to ensure the safe operation of the experiment without accidents. (optional)
5. With 4~20mA standard current signal, RS485 interface can be connected with Recorder and computer, and can record the change of temperature parameters. (optional)
6. Ultraviolet sterilization system for mold Incubator. Regular disinfection can effectively prevent contamination during cell culture.
Series
Biochemical Incubator (the one with F is the fluorine-free type) | |||||
model | LRH-70(F) | LRH-150(F) | LRH-250(F) | LRH-350(F) | LRH-500(F) |
Temperature control range | 4~60℃ | ||||
temperature resolution | 0.1°C | ||||
Constant temperature fluctuation | ±0.5℃ | ||||
input power | 350W | 450W | 650W | 850W | 1500W |
Working temperature | 4~35℃ | ||||
Voltage | 220V 50HZ | ||||
Studio size(mm) | 400X350X510 | 500X370X800 | 520X460X4050 | 600X550X1000 | 600X700X1200 |
Carrier (standard) | 2 blocks | 3 pieces | |||
Timer Range | 1~9999min | ||||
BoZhen LRH-250F Biochemical IncubatorSpecifications
| LIST | VALUE |
|---|---|
| Temperature range | 4~60℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature Resolution | 0.1℃ |
| Liner material | Good stainless steel |
| Liner size | 520*460*405mm |
| Shelf (std.) | 2 pieces |
| Timer | 1~9999min |
| Power | 220V 50HZ |
| Input power | 650W |
| Environment temperature | 4~35℃ |
| Enclosure Material | Good steel plate plastic spray |
BoZhen LRH-250F Biochemical Incubator Packing list
completeness-built unit X1, Shelf X3, operation manual X1, warranty card X1, certificate of conformity X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
