Xiangmin ZHY Automatic Scratch meter
Xiangmin ZHY automatic Scratch meter needle traverse speed 3 cm/S, needle ball diameter 1 mm, motor Power 6W, configuration weight 100g, 200g, 500g each, 50g, 100g each two, a total of seven weights, test load 50g~ 2000g.
xiangmin
ZHY
-
TQC Sheen SH0530 coating surface scratch resistance instrument
$ 9911.00 -
Evaluation of scratch resistance of PUSHEN ZHY automatic Scratch meter
$ 1058.00 -
JFL QHZ film scratch test instrument
$ 623.00 -
YONGLIDA QHZ film scratch test instrument, according to GB/T9279
$ 478.00 -
HUITAO HT-783 paints Scratching Tester coating Scratching meter
$ 4018.00
Brief introduction
ZHY automatic scratch Tester is used to determine the scratch resistance of single coat or composite coating system of pigment and varnish or related products.
xiangmin ZHY Scratch MeterSpecifications
| LIST | VALUE |
|---|---|
| Scribe traverse speed | 30mm/s |
| Scribe ball diameter | 1mm |
| Motor Power | 6W |
| Load (loading) range | 1 each for 100g, 200g, 500g, 2 each for 50g and 100g, a total of 7 Weights |
| Power supply Voltage | 220V AC 50HZ |
| Dimension | 380*300*180mm |
| instrument Weight | 25kg |
| Load (loading) range | 50g~2000g |
xiangmin ZHY Scratch Meter Packing list
whole machine X1, operation manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Scratch hardness test: pencil method, scratch method
- Coatings - Determination of needle penetration resistance performance
- Paint film scratch test method and its application analysis
- How to comprehensively evaluate the bonding force of membrane base by scratch method?
- Impact scratch method for determination of bonding strength of Ni-P chemical platings
- Modern environment full range of product selection table [selection]
- Test principle and operation method of Pushen ZHY automatic scratch instrument
- Modern environment ZHY type, automatic Scratch meter operating instructions
- Scratch meter energy consumption measurement improvement scheme
- Determination of Bonding Strength of Hard Coating by Automatic Scratch meter
- ActiveISO FDIS 1518-2010
- Active 1518-2010
- ActiveISO 12137-2011
- ActiveGB/T 17657-2013
- ActiveGB/T 15102-2017
- ActiveISO 1520-2006
- ReplacedISO 1518-2011
- ISO 12137-2-1997
- ISO 12137-1-1997
- ReplacedISO 1518-1992
- AbolishGB/T 9279-2007
- ActiveGB 13452.4-2008