Xiangmin XM-ZY001 Needle Flame Tester
The needle combustion device of Xiangmin XM-ZY001 needle flame Tester is made of stainless steel, the inner hole is 0.5mm +/- 0.1mm, the outer diameter is less than or equal to 0.9mm, and the length is ≥ 35mm. The angle of the combustion device can be vertical (when adjusting and measuring the flame height) and inclined 45 ° (during the test).
xiangmin
XM-ZY001
-
CHINA NBC-4326 Plastic combustion flame retardant Test Chamber UL94 horizontal vertical combustion Tester
$ 1131.00 -
YOUKE YK3260 single line vertical combustion testing machine
$ 1174.00 -
YOUKE YK3054 Glow Wire Tester (Touch Screen)
$ 1781.00 -
YOUKE YK3050 Horizontal and vertical combustion Tester
$ 1392.00 -
YOUKE YK3056 Needle Flame Tester (Touch Screen)
$ 1781.00
Introduction
Usage: The needle flame Tester is IEC 6 0695-11-5:2004, IEC60695-11-5, GB/T5169.5-2008, GB4706.1-2005 needle flame test is to use a needle burner of specified size (0.9mm), through a specific gas (butane or propane), at a 45° angle timing directional combustion of the test product, The ignition hazard of small flames caused by fault conditions in the equipment is evaluated according to whether the test sample and the ignition bedding layer are ignited, the ignition time and combustion length are evaluated.
The needle flame Tester is suitable for the research, production and quality inspection departments of electrical and electronic equipment and its components and components, such as lighting, low-Voltage electrical appliances, household appliances, machine tool appliances, motors, power tools, electronic instruments, electrical instruments, information technology equipment, electrical affairs equipment, electrical connectors, accessories, etc., and is also suitable for insulating materials, engineering plastics or other solid combustible materials industry.
xiangmin XM-ZY001 Needle flame TesterSpecifications
| LIST | VALUE |
|---|---|
| Needle combustion device | Stainless steel, inner hole φ 0.5 +/- 0.1mm, outer diameter ≤ φ 0.9mm, length ≥ 35mm |
| Combustion angle | Vertical (when adjusting and measuring flame height) and tilted 45 ° (when testing) |
| Ignition paving layer | 10Mm thick white pine board, covered with 12g /m2~ 30g/m2 standard silk paper, 200mm +/- 5mm from the flame application |
| Combustion gas | 95% butane gas (base gas), propane gas can also be used |
| Gas flame temperature layer | 100 ℃ +/- 2 ℃~ 700 ℃ +/- 3 ℃ (room temperature~ 999 ℃), 23.5s +/- 1.0s (1s~ 999.9s) |
| flame height | 12Mm +/- 1mm (adjustable) |
| Flame time | 5S, 10s, 20s, 30s, 60s, 120s~ 1 + 0 s (1s~ 999.9s digital display can be preset) |
| holding time | 1S~ 999.9s (digital display, can be manually paused to hold digital display) |
| Test space | ≥ 0.5m3, background black or 1m3 |
| Thermocouple | Equipped with K-type 0.5mm insulated armored couple, the armored sleeve is heat-resistant to 1100 ℃ |
| Exhaust hole size | 100mm |
| Test Power Supply | 220V 0.5kVA |
xiangmin XM-ZY001 Needle flame Tester Packing list
whole machine X1, operation manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.