Xiangmin XM-GK001 battery simulation high altitude low Voltage testing machine

Introduction

It is suitable for simulating the battery to reach the storage state of the sample at low air pressure in a short time, and can automatically control the test cycle, monitor the air pressure change in the box throughout the process, and realize the automatic termination of the test.

Time system

1. Timer setting, 1 second to 99 hours (you can choose to set hours, minutes, seconds)

2. After the vacuum test time is completed, the automatic pressure relief will alarm at the same time.

Sealed and trueEmpty display

1. The machine adopts silicone sealing strip with high tightness to ensure the tightness of the whole machine;

2. At the same time, the pointer vacuum gauge is used to display the real-time vacuum degree in the box, so that you can understand the vacuum status in the box in real time;

3. Vacuum range: 0 to -0.1Mpa, digital pressure gauge; (vacuum≤133Pa) pressure fluctuation <2Kpa, pressure accuracy 0.1Kpa, Accuracy 1Kpa;

4. Control mode: manual start, stop, pressure relief;

5. Two-stage rotary vane type, 4 liters direct-connected Vacuum Pump, power 550W/220V

whole machine X1, operation manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.