PHYNIX Surfix Easy x I-FN HR dual-use Film Thickness Gauge 3000 μm

Introduction

The PHYNIX Surfix Easy x I-FN HR dual-purpose paint Film Thickness Gauge is a dual-function coating Thickness Gauge that can measure thickness up to 3000 microns. It is a portable Thickness Gauge with a built-in probe.

The universal coating Thickness Gauges of the Surfix®easy X series are suitable for daily operation as well as demanding laboratory measurements. The Surfix®easy

One-touch calibration function can be used to perform difficult measurement tasks. Using this calibration feature (also called "zeroing"), you can improve measurement accuracy. Built-in online statistics quickly display mean and standard deviation as well as maximum and minimum measurements.

Surfix®easy X is available as Surfix®easy XI with integrated probe and Surfix®easy XE with external, securely connected probe. Both models are available as combination device FN for measuring coating thickness on iron/steel and non-ferrous metals, or as model F for measuring coating thickness on iron/steel only. Two validated thickness measurement methods are used: the magnetic method and the eddy current method (DIN EN ISO 2178 and 2360). Both provide the highest precision even in the case of thin coatings, whether on steel or non-ferrous metals. The FN type uses two methods. When you place the probe on the measurement object, the selection is completed automatically.

Application areas

All probes of the Surfix®easy X series are designed with V-grooves, allowing stable vertical positioning on horizontal, cylindrical or curved surfaces. Applicable to the following areas:

• In the paint store

• For paint coatings and powder coating technology

• For use in car evaluations and car workshops

• In steel construction, automobile manufacturing and shipbuilding industries

• In the receiving area

• during production

• Final inspection and quality assurance

• In the laboratory

Product advantages

• Calibration-free measurement: just turn on and measure

• Backlit display is easy to read even in dark environments

• "Zero" (single point calibration) enables precise measurements on flat, rough and curved surfaces

• Measurement of steel/non-ferrous metals with automatic identification of base materials

• Online statistics (number, average, standard deviation, minimum value, maximum value)

• Large landing area to ensure safe positioning

• Acoustic signal while recording readings

• Switchabel unit µm / mils

• Manufacturer's test certificate

• 2 years warranty

Parameter comparison of PHYNIX coating Thickness Gauge series

	Surfix Pro X	Surfix SX	Surfix EX	Pocket-Surfix X	Surfix easy X HR
model	Split, replaceable probe	Split, replaceable probe	External fixed probe	Built-in probe	Built-in or external, fixed probe
Measuring range iron base	30mm	30mm	1.5mm	1.5mm	3mm
Measuring range non-iron based	3mm	3mm	1.5mm	1.5mm	3mm
Accuracy	±(0.7μm+1% of reading)	±(0.7μm+1% of reading)	±(1μm+1% of reading)	±(1μm+1% of reading)	2μm or 2% reading
Hard metal probe	●	●	●	●	●
Factory calibration	●	●	●	●	●
Calibration method	Two-diaphragm calibration, single-diaphragm calibration, zero calibration, CTC	Single diaphragm calibration, zero calibration	Single diaphragm calibration, zero calibration	Single diaphragm calibration, zero calibration	zero calibration
Diaphragm calibration	●	●	●	●	-
Calibration storage	●	-	-	-	-
statistics	●	●	●	●	●
zero compensation	●	●	●	●	-
Boundary value	●	●	●	●	-
data storage	Up to 100,000 readings	Up to 2000 readings	Up to 2000 readings	Up to 80 readings	-
data transmission	Bluetooth/USB	USB	USB	USB	-
menu	●	●	●	●	-
Backlight display	●	●	●	●	●
continuous measurement	●	-	-	-	-
Solvent resistant probe	●	●	●	●	●
maximum surface temperature	300℃	300℃	300℃	60℃	60℃
Optional probe	●	●	-	-	-
Includes PC software	●	●	●	●	-

host x1, test piece 100umx1, zero standard piece containing iron and aluminum x1, material package x1, rubber protective cover x1, battery x2, user manual x1.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.