Qnix 5500Fe3mm magnetic Induction Coating Thickness Gauge

The QNix 5500 Coating Thickness Gauge is a convenient, durable, and action-friendly instrument for:Modular version, the user can decide which probe to use and the cable. Just in case, remember to disconnect the power supply when replacing the probe!

Whether in industrial painting and engineering coatings, in heavy corrosion protection or in vehicle evaluations conducted by vehicle professionals and retailers: QNix^®The 5500 provides you with excellent support for rapid inspection of coatings, and there is no need for complex equipment configuration - just turn it on, turn it on, and read it.

The large 2-inch color LCD with auto-flip makes it easier to read the measured values in any position, even in harsh lighting conditions. Such as bridge cavities and Water Tanks or when working outdoors orIn strong sunlight. QNix5500Provide all the necessary statistical information about the current measurement series:Display of mean, standard deviation, maximum and minimum measurements.

The proper design ensures safe contact and avoids erroneous measurements. For smaller contact areas or inclined components, simply use the probe cable and plug the QNix®5500 inStay in the cable device for a few seconds (only for the modular version). The angled cable connection makes it easier to work comfortably even when space is limited.

With one-click operation, you can quickly and reliably make adjustments to the base substrate or the included zero plate.

The right probe for every application – precise, with high accuracy over the entire measuring range: measuring ranges from 1.25 mm to 3 mm to 5 mm, Fe, NFe or dual probes can be used.

QNix5500 host, 1 Fe zero adjustment board each, 1 standard piece, factory test report, instruction manual, 2 1.5V AA alkaline batteries, plastic instrument case

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.