Qnix Fe1.2mm magnetic thickness probe
The Nix Qnix Fe1.2mm magnetic thickness probe has a thickness measurement range of 0 to 1250 microns. Measurement accuracy is +/- (1 µm + 2% reading) < 2.0mm; when +/- 3% reading > 2.0mm, it is an optional probe for the Qnix5500 and Qnix9500 series Thickness Gauges.
Qnix
Fe1.2mm
-
Defelsko PosiTector BDYSTD Standard host, new, probe available separately
$ 428.00 -
LEEB Probe N1 eddy Current Probe with leeb242 Coating Thickness Gauge
Login -
AMITTARI USB data cable, which can be connected to most AMITTARI series test instruments through the RS-232 software system
$ 108.00 -
Defelsko PRB200B Ultrasonic Thickness Gauge Probe PosiTector200B
$ 2504.00 -
Defelsko PosiTector 200 B3 Wood, plastic polymer Coating Thickness Gauge Premium
$ 3264.00
The QNix®9500 probe is a new design. Its standard probe is small and sturdy, and can be used for Fe, NFe, or Fe/NFe dual purposes.
The LED light built into the probe is used to prompt whether the measured value exceeds the limit without checking the host display.
The QNix®9500 integrated design has built-in probes, and you can also choose interchangeable external probes with modular design.
Features
⢠Stainless steel probe with protective film inside, IP65 dustproof and waterproof
⢠Wear-resistant ruby ââprobe
⢠Chemical-resistant material, suitable for chemical cleaning (acetone, nitro dilution, ethanol)
⢠LED indicator light on probe
⢠The probe wire is drag chain type and can be bent at will
Each probe has an electronic calibration certificate stored in it, which can be loaded into the test report through a PC.
Qnix Fe1.2mm probeSpecifications
| LIST | VALUE |
|---|---|
| Measurement principle | Magnetic Induction |
| Measurement range | 0~1250μm |
| margin of error | ±2~3% |
| Minimum measurement surface | Φ20mm |
| Minimum radius of curvature | Radius 20mm |
| thinnest substrate | 0.2mm |
| Probe size | Φ14.5*34.5mm |
| Probe material | Ruby (Al203) |
| Probe Weight | 11.9 g |
| Calibrated Certificate | Electronic calibrated Certificate |
| Standards | DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900-C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091 |
| Operating temperature | -20 ℃-70 ℃ |
| Protection level | IP65 |
| Probe housing material (top) | Stainless steel (1.4305) |
| Probe housing material (bottom) | Trogramid® |
| Storage temperature | -20~70℃ |
| Maximum workpiece surface temperature for continuous measurement | 80 ℃ |
| LED probe status display | Yes. |
| LED over-limit display | Yes. |
Qnix Fe1.2mm probe Packing list
Fe1.2mm probe X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Impact performance and importance of steel pipe coatings
- Coating Thickness Gauge for coated Film thickness measurement in vehicle evaluation
- Optimizing laboratory management and paint production with Qnix8500 coated Film thickness measurement technology
- How does the QNix Coating Thickness Gauge maintain accuracy?
- Concept and basic knowledge of coating Thickness Gauge
- Preparation of SiO _ 2 aerogel composite insulating coating
- Film coating thickness measurement in industrial painting and cissing coating
- Application of QNIX Thickness Gauge in coated Film thickness measurement
- Application of QNix Coating Thickness Gauge in coating Film thickness measurement
- ActiveHG/T 3240-2007
- ActiveQJ 990.3A-2011
- ReplacedNF EN ISO 2808-2007
- ActiveGB/T 42541-2023
- ActiveGB/T 13912-2020
- ActiveGB/T 7991.5-2014
- ActiveJJG 818-2018
- ActiveGB/T 1727-2021
- ActiveHG/T 20720-2020
- ActiveSY/T 0315-2013
- ActiveGB/T 4956-2003
- ISO 6158-1984
- ActiveISO 1461-2022
- AbolishGB/T 4956-1985
- ActiveQB/T 2183-1995
- ActiveJB/T 7217-2008
- ActiveJB/T 7663.2-2007
- ActiveJB/T 9857-2010
- ActiveJB/T 5000.12-2007
- ActiveGB/T 8923.1-2011