Qnix Fe3mm magnetic thickness probe 3000μm
The Nix Qnix Fe3mm magnetic thickness probe has a thickness measurement range of 0 to 3000 microns. Measurement accuracy is +/- (1 µm + 2% reading) < 2.0mm; when +/- 3% reading > 2.0mm, it is an optional probe for the Qnix5500 and Qnix9500 series Thickness Gauges.
Qnix
Fe3mm
-
Germany EPK FN1.6/90 Thickness Gauge probe 90 ° thickness measurement range 0~1600um
$ 2623.00 -
Linshang LS225 Coating Thickness Gauge with F500 Magnetic Probe + Test Fixture
$ 873.00 -
LANDTEK CM8829n paint Thickness Gauge, integrated eddy current paint Thickness Gauge
$ 309.00 -
Qnix Fe/NFe 1.2mm Dual Function Thickness Probe for magnetic Induction and eddy Current 1250μm
$ 1033.00 -
Defelsko PosiTector 6000 FN1 Coating Thickness Gauge for automatic substrate type and measurement
$ 1266.00
The QNix®9500 probe is a new design. Its standard probe is small and sturdy, and can be used for Fe, NFe, or Fe/NFe dual purposes.
The LED light built into the probe is used to prompt whether the measured value exceeds the limit without checking the host display.
The QNix®9500 integrated design has built-in probes, and you can also choose interchangeable external probes with modular design.
Features
⢠Stainless steel probe with protective film inside, IP65 dustproof and waterproof
⢠Wear-resistant ruby ââprobe
⢠Chemical-resistant material, suitable for chemical cleaning (acetone, nitro dilution, ethanol)
⢠LED indicator light on probe
⢠The probe wire is drag chain type and can be bent at will
Each probe has an electronic calibration certificate stored in it, which can be loaded into the test report through a PC.
Qnix Fe3mm probeSpecifications
| LIST | VALUE |
|---|---|
| Measurement principle | Magnetic Induction |
| Measurement range | 0~3000μm |
| margin of error | ±2~3% |
| Minimum measurement surface | Φ20mm |
| Minimum radius of curvature | Radius 20mm |
| thinnest substrate | 0.2mm |
| Probe size | Φ14.5*34.5mm |
| Probe material | Ruby (Al203) |
| Probe Weight | 11.9 g |
| Calibrated Certificate | Electronic calibrated Certificate |
| Standards | DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900-C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091 |
| Operating temperature | -20 ℃-70 ℃ |
| Protection level | IP65 |
| Probe housing material (top) | Stainless steel (1.4305) |
| Probe housing material (bottom) | Trogramid® |
| Storage temperature | -20~70℃ |
| Maximum workpiece surface temperature for continuous measurement | 80 ℃ |
| LED probe status display | Yes. |
| LED over-limit display | Yes. |
Qnix Fe3mm probe Packing list
Fe3mm probe X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Impact performance and importance of steel pipe coatings
- Optimizing laboratory management and paint production with Qnix8500 coated Film thickness measurement technology
- Coating Thickness Gauge for coated Film thickness measurement in vehicle evaluation
- Concept and basic knowledge of coating Thickness Gauge
- Film coating thickness measurement in industrial painting and cissing coating
- Application of QNix Coating Thickness Gauge in coating Film thickness measurement
- Application of QNIX Thickness Gauge in coated Film thickness measurement
- Preparation of SiO _ 2 aerogel composite insulating coating
- How does the QNix Coating Thickness Gauge maintain accuracy?
- ActiveHG/T 3240-2007
- ActiveQJ 990.3A-2011
- ReplacedNF EN ISO 2808-2007
- ActiveGB/T 42541-2023
- ActiveGB/T 13912-2020
- ActiveGB/T 7991.5-2014
- ActiveJJG 818-2018
- ActiveGB/T 1727-2021
- ActiveHG/T 20720-2020
- ActiveSY/T 0315-2013
- ActiveGB/T 4956-2003
- ISO 6158-1984
- ActiveISO 1461-2022
- AbolishGB/T 4956-1985
- ActiveQB/T 2183-1995
- ActiveJB/T 7217-2008
- ActiveJB/T 7663.2-2007
- ActiveJB/T 5000.12-2007
- ActiveGB/T 8923.1-2011
- ActiveGB/T 1733-1993