Qnix Fe3mm magnetic thickness probe 5000 μm
The Nix Qnix Fe5mm magnetic thickness probe uses the principle of magnetic Induction thickness measurement, the thickness measurement range is 0~5000 μm, and the Measurement accuracy is +/- (1 µm + 2% of the reading) at < 2.0mm; +/- 3% of the reading at > 2.0mm. It is an optional probe for the Qnix5500 and Qnix9500 series Thickness Gauges.
Qnix
Fe5mm
-
DONGRU DR320 Coating Thickness Gauge electromagnetic induction principle for magnetic metal substrate surface platings measurement
$ 304.00 -
Defelsko FTS split conventional probe 6000 μm thick coating Measurement range
$ 812.00 -
List Magnetik Pocket TOP-CHECK FE Pocket platings Thickness Gauge
$ 1159.00 -
LANDTEK CM8820 (5mm Range) Cladding Thickness Gauge, Large Range Customized Type
$ 346.00 -
Defelsko PosiTector 6000 F3 Coating Thickness Gauge nonmagnetic coatings
$ 1335.00
The QNix®9500 probe is a new design. Its standard probe is small and sturdy, and can be used for Fe, NFe, or Fe/NFe dual purposes.
The LED light built into the probe is used to prompt whether the measured value exceeds the limit without checking the host display.
The QNix®9500 integrated design has built-in probes, and you can also choose interchangeable external probes with modular design.
Features
⢠Stainless steel probe with protective film inside, IP65 dustproof and waterproof
⢠Wear-resistant ruby ââprobe
⢠Chemical-resistant material, suitable for chemical cleaning (acetone, nitro dilution, ethanol)
⢠LED indicator light on probe
⢠The probe wire is drag chain type and can be bent at will
Each probe has an electronic calibration certificate stored in it, which can be loaded into the test report through a PC.
Qnix Fe5mm probeSpecifications
| LIST | VALUE |
|---|---|
| Measurement principle | Magnetic Induction |
| Measurement range | 0~5000μm |
| margin of error | ±2~3% |
| Minimum measurement surface | Φ20mm |
| Minimum radius of curvature | Radius 20mm |
| thinnest substrate | 0.2mm |
| Probe size | Φ14.5*34.5mm |
| Probe material | Ruby (Al203) |
| Probe Weight | 11.9 g |
| Calibrated Certificate | Electronic calibrated Certificate |
| Standards | DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900-C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091 |
| Operating temperature | -20 ℃-70 ℃ |
| Protection level | IP65 |
| Probe housing material (top) | Stainless steel (1.4305) |
| Probe housing material (bottom) | Trogramid® |
| Storage temperature | -20~70℃ |
| Maximum workpiece surface temperature for continuous measurement | 80 ℃ |
| LED probe status display | Yes. |
| LED over-limit display | Yes. |
Qnix Fe5mm probe Packing list
Fe5mm probe X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Impact performance and importance of steel pipe coatings
- Application of QNIX Thickness Gauge in coated Film thickness measurement
- Concept and basic knowledge of coating Thickness Gauge
- How does the QNix Coating Thickness Gauge maintain accuracy?
- Coating Thickness Gauge for coated Film thickness measurement in vehicle evaluation
- Film coating thickness measurement in industrial painting and cissing coating
- Optimizing laboratory management and paint production with Qnix8500 coated Film thickness measurement technology
- Application of QNix Coating Thickness Gauge in coating Film thickness measurement
- Preparation of SiO _ 2 aerogel composite insulating coating
- ActiveHG/T 3240-2007
- ActiveQJ 990.3A-2011
- ReplacedNF EN ISO 2808-2007
- ActiveGB/T 42541-2023
- ActiveGB/T 13912-2020
- ActiveGB/T 7991.5-2014
- ActiveJJG 818-2018
- ActiveGB/T 1727-2021
- ActiveHG/T 20720-2020
- ActiveSY/T 0315-2013
- ActiveGB/T 4956-2003
- ISO 6158-1984
- ActiveISO 1461-2022
- AbolishGB/T 4956-1985
- ActiveQB/T 2183-1995
- ActiveJB/T 7217-2008
- ActiveJB/T 7663.2-2007
- ActiveJB/T 5000.12-2007
- ActiveGB/T 8923.1-2011
- ActiveGB/T 1733-1993