Qnix Fe/NFe5mm Dual Function Thickness Probe magnetic Induction and eddy Current 5000 μm
The Nix Qnix Fe/NFe5mm thickness probe is a magnetic and nonmagnetic dual-use thickness probe with LED indicator light on the probe. Measurement range is 0~5000 microns. It is an optional strip probe for Qnix5500 and Qnix9500 series Thickness Gauges.
Qnix
Fe/NFe5mm
-
Qnix Fe3mm magnetic thickness probe 3000μm
$ 739.00 -
Defelsko PosiTector 6000 F0S3 Film Thickness Gauge
$ 1756.00 -
List MEGA-CHEK Profi Storage platings Thickness Gauge
$ 1812.00 -
Defelsko PosiTest G Coating Thickness Gauge for Eletroplating, thin paint layer, steel phosphating film thickness measurement with certificate
$ 455.00 -
LEEB Leeb252C Metal Coating Thickness Gauge magnetic Induction/eddy Current Range 0~1500μm
$ 254.00
The QNix®9500 probe is a new design. Its standard probe is small and sturdy, and can be used for Fe, NFe, or Fe/NFe dual purposes.
The LED light built into the probe is used to prompt whether the measured value exceeds the limit without checking the host display.
The QNix®9500 integrated design has built-in probes, and you can also choose interchangeable external probes with modular design.
Features
⢠Stainless steel probe with protective film inside, IP65 dustproof and waterproof
⢠Wear-resistant ruby ââprobe
⢠Chemical-resistant material, suitable for chemical cleaning (acetone, nitro dilution, ethanol)
⢠LED indicator light on probe
⢠The probe wire is drag chain type and can be bent at will
Each probe has an electronic calibration certificate stored in it, which can be loaded into the test report through a PC.
Qnix Fe/NFe5mm probeSpecifications
| LIST | VALUE |
|---|---|
| Measurement principle | Magnetic Induction + eddy Current |
| Measurement range | 0~5000μm |
| margin of error | ±2~3% |
| Minimum measurement surface | Φ20mm |
| Minimum radius of curvature | Radius 20mm |
| thinnest substrate | 0.2mm(F)；0.05mm(N) |
| Probe size | Φ14.5*34.5mm |
| Probe material | Ruby (Al203) |
| Probe Weight | 11.9 g |
| Calibrated Certificate | Electronic calibrated Certificate |
| Standards | DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900-C5, ASTM B 499, ISO 2360, ASTM D 1400, ASTM D 1186, ASTM D 7091 |
| Operating temperature | -20 ℃-70 ℃ |
| Protection level | IP65 |
| Probe housing material (top) | Stainless steel (1.4305) |
| Probe housing material (bottom) | Trogramid® |
| Storage temperature | -20~70℃ |
| Maximum workpiece surface temperature for continuous measurement | 80 ℃ |
| LED probe status display | Yes. |
| LED over-limit display | Yes. |
Qnix Fe/NFe5mm probe Packing list
Fe/NFe5mm
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Application of Coating Thickness Gauge in Automobile Refinish Paint Detection
- Frequently Asked Questions about Coating Thickness Gauge Calibration?
- What is the significance of coating Thickness Gauge calibration? How to calibrate? When to calibrate?
- What is the difference between Magnetic Induction Film Thickness Gauge and eddy Current Film Thickness Gauge?
- Measurement principle of commonly used coating Thickness Gauge
- Preparation of SiO _ 2 aerogel composite insulating coating
- Application of QNIX Thickness Gauge in coated Film thickness measurement
- Application of QNix Coating Thickness Gauge in coating Film thickness measurement
- Coating Thickness Gauge for coated Film thickness measurement in vehicle evaluation
- How does the QNix Coating Thickness Gauge maintain accuracy?
- ActiveGB/T 44757-2024
- ActiveQJ 990.3A-2011
- ReplacedNF EN ISO 2808-2007
- ActiveGB/T 13448-2019
- ActiveJJG 818-2018
- ActiveGB/T 1727-2021
- ActiveHG/T 20720-2020
- ActiveHG/T 5367.1-2018
- ActiveISO 2808-2019
- ActiveGB/T 4956-2003
- AbolishGB/T 13448-2006
- AbolishISO 4042-1999
- ActiveHG/T 3885-2006
- AbolishGB/T 4956-1985
- ActiveGB/T 5209-1985
- ActiveQB/T 2183-1995
- ActiveJB/T 5000.12-2007
- ActiveGB/T 1733-1993
- ActiveGB/T 4957-2003