JINGHUAYIQI LD-XBL-A Cantilever Impact Tester 3 types of pendulum energy
The impact speed of JINGHUAYIQI LD-XBL-A cantilever beam Impact Tester is 3.5m/s, with three pendulum energies of 1J, 2.75J, and 5.5J. The JH-XBL cantilever beam Impact Tester is suitable for measuring the impact of plastics, reinforced nylon, frp, ceramics, and cast stones.
JingHuaYiQi
LD-XBL-A
-
HUITAO CSI-SX48 automatic crease recovery Tester, fiber fabric folding recovery detection
$ 3039.00 -
TRUIT TR 3301/1 Penetration cup, test area 10cm ²
$ 115.00 -
SuJie FKC-I planktonic bacteria sampling capacity 100~6000L
$ 1612.00 -
CHINA NBC-9016 Battery Needle Extrusion Tester, Integrated Extrusion Needle
$ 2530.00 -
CHINA NBC-1220S Vertical Plug-in Life Tester, Terminal Harness Tester
$ 3478.00
Introduction
The cantilever beam impact testing machine is used to measure the impact toughness of non-metallic materials such as plastics, reinforced nylon, glass fiber reinforced plastics, ceramics, cast stone, plastic electrical appliances, and insulating materials. It is a common equipment for quality inspection of scientific research units, colleges and universities, and non-metallic material manufacturers.
Executive standard
ISO179-92, GB1043-93, GB/T1843-1996, JB/T8761-1998
JingHuaYiQi LD-XBL-A Cantilever Impact TesterSpecifications
| LIST | VALUE |
|---|---|
| impact velocity | 3.5m/s |
| Impact energy | 1J、2.75J、5.5J |
| Pendulum lift angle | 150° |
| Distance from the center of the pendulum to the impact blade | 335mm |
| Distance from impact blade to upper plane of jaw | 22mm |
| Blade fillet radius | R=0.8mm |
JingHuaYiQi LD-XBL-A Cantilever Impact Tester Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveGB/T 45159.3-2024
- ActiveASTM D2794-2024
- ActiveASTM D 2794-2019
- ActiveGB/T 9260-2008
- ActiveGB/T 7788-2007