PNSHAR PN-DT15 Dropping Tester

The surface, angle and edge of the package are free drop test, equipped with a digital height display instrument and a decoder for height tracking, so that the product drop height can be accurately given, and the error from the preset drop height is not more than 2% or 10mm. The machine adopts a single-arm double-column structure, with electric reset, electronically controlled drop and electric lifting device, which is easy to use, and has a hydraulic buffer device to greatly improve the service life, stability and safety of the machine. The single-arm setting can easily place the product, and the angle error between the impact surface of the drop angle and the plane of the bottom plate is less than or equal to 50.

 Execution standards

GB/T4757.5 、JB/T7407 、ISO2248

 Features

1. Adopt single-arm double-column structure design to prevent falling off due to sudden power failure, and the lifting is stable;

2. The supporting arm adopts an electric reset design, and there is no need to pull the supporting arm to reset it by hand;

3. The supporting arm adopts an electromagnet pulling structure, assisted by a tension spring, to ensure that the supporting arm falls off instantly;

4. It has a hydraulic buffer device design, which instantly absorbs the impact energy of the supporting arm;

5. The general-purpose specimen bracket design can quickly locate the edges, corners and surfaces of packages of different sizes for testing.

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.