RDS 5 #3/8 "+ KHC.21 Applicator rod + Drawdown Plate set

The RDS 5# 3/8"+KHC.21 Doctor Wand + Stamping Table Set consists of an RDS5 wire rod and an embossing table.

The RDS 5 wire bar applicator (also known as the coating rod and squeegee bar) can be used for laboratory preparation of precise film layers, the No. 5 squeegee bar is made of high-grade stainless steel, depending on the process, RDS provides No. 5 forming coating rod, No. 5 filament wound coating rod, and the filament wound wire bar applicator can also be selected in 1/4, 3/8 and 1/2 inch diameters. Theoretically, the wet film thickness of wet film coatings prepared with different diameters is the same, but the difference is that the amount of coating used will be different due to the different groove shape and main rod diameter. The mainstream in CHINA is 3/8 diameter, while in Taiwan, CHINA and Singapore, more 1/4 diameter wire bar applicators are used.

RKThe embossing table consists of a clip, a rigid polyester sheet, and a layer of foam/rubber upholstery. Compared to proofing directly on a hard substrate, proofing on an RK imprint machine has better repeatability and proofing results. This is due to the fact that the soft foam/rubber liner can absorb the pressure applied by the operator to a certain extent, so as to make the proofing effect better.

Illustration of the RK imprint bed

Optional

Note: Click on the accessory image to view the product details.

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.