RDS8 #3/8 "+ KHC.21 Spreader + Drawdown Plate Set

The RDS8# 3/8"+KHC.21 Coating Squeegee + Stamping Table Set consists of 1 RDS8 squeegee and an RK stamping table.

The United States RDS # 8 coating scraper has two processes: wire winding rod and forming rod, of which the wire winding rod is divided into 1/2'',3/8''、1/4'' three diameters, the same model of RDS wire Bar Coater prepared wet film thickness is the same,The RDS #8 wire rod applicator can be applied with a wet film thickness of 18.3 microns, a rod length of 400mm, and a 50mm grip section at each end. The RDS wire rod coater is made of 303 stainless steel, which has the characteristics of wear resistance and corrosion resistance, and is not only suitable for the coating and ink industry, but also has a wide range of applications in resin, plastic, pressure sensitive adhesive and other industries.

RKThe embossing table consists of a clip, a rigid polyester sheet, and a layer of foam/rubber upholstery. Compared to proofing directly on a hard substrate, proofing on an RK imprint machine has better repeatability and proofing results. This is due to the fact that the soft foam/rubber liner can absorb the pressure applied by the operator to a certain extent, so as to make the proofing effect better.

Illustration of the RK imprint bed

Optional

Note: Click on the accessory image to view the product details.

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.