LIULING CH-20 10kPa, 22kPa Benchtop Percent Special Gauge Thickness Gauge Ø 4 Upper Probe
LIULING CH-20 rubber thickness gauge is a desktop pointer thickness gauge, in line with GB/T 7759.1, ISO 815-1 standards, measurement Film thickness 0~ 20mm, CH-20 on the probe diameter of 4mm, the lower table is 23mm diameter stainless steel plane.
LiuLing
CH-20Ø 4 upper probe
-
WBT-02 Bottle Wall Film thickness Tester, digital display, bottle, box
$ 637.00 -
LIULING CH-10-AT φ 10mm upper probe, desktop percentile special gauge thickness gauge asphalt waterproof membrane thickness gauge 0~ 10mm
$ 257.00 -
Japan PEACOCK Peacock H-1.8N Percent Thickness Gauge
$ 148.00 -
LIULING CH-1-S Plastic film sheet hand thickness gauge 0~ 1mm
$ 257.00 -
XINGHUO ZTT-950 pavement marking line Thickness Gauge
$ 276.00
Introduction
This Thickness Gauge is a Thickness Gauge customized according to customer requirements. It refers to the implementation of the national standard GB/T 7759.1-2015/ISO 815-1:2008 "Determination of permanent compression deformation of vulcanized rubber or thermoplastic rubber Part 1: Under normal temperature and high temperature conditions", Article 4.4: For hardness less than 35 IRHD The pressure applied to the rubber should be 10kPa±2kPa; the pressure applied to the rubber with a hardness greater than or equal to 35 IRHD should be 22kPa±5kPa. The Thickness Gauge has the characteristics of simple structure, convenient use and reliable quality.
LiuLing CH-20Ø 4 upper probe 10kPa, 22kPa desktop percentile thickness gaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0~20mm |
| reading display | Pointer |
| Graduation | 0.01mm |
| Pressure and mass required | ①10kPa±2kPa (13g±2g)；②22kPa±5kPa (28 g± 6g) |
| Probe diameter | φ φ 56.42mm plane (2500mm2) |
| Meet the standard | GB/T 7759.1-2015；ISO 815-1:2008 |
| upper probe diameter | φ 4mm plane |
| Lower workbench | φ 23mm stainless steel flat plus φ 80mm tray |
LiuLing CH-20Ø 4 upper probe 10kPa, 22kPa desktop percentile thickness gauge Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveJJF 1488-2014
- ActiveHG/T 2041-2009
- ActiveGB/T 14831-2003
- ActiveJJG (轻工)50.2-2000
- ActiveQB/T 1055-2004