JENCO 9010M portable dissolved oxygen Tester, range: 0.00~20.00mg/L

JENCO 9010M portable dissolved oxygen Tester can display dissolved oxygen, air saturation, temperature value, JENCO 9010M dissolved oxygen value Measurement range of 0.00~20.00mg/L, widely used in aquaculture, river water quality measurement, sewage measurement.

Brand

SKU: NB002916

JENCO

Model

9010M

Service

JENCO shop

Information

Datasheet Catalog Manual

What else did others buy

DDKSIC PD100 desktop pH, Dissolved Oxygen Meter pH/mV (ORP electrode optional)/DO/℃

$ 789.00
HANNA HI98311 conductivity EC/TDS total solid solubility Measurement Instrument

$ 297.00
LEICI 780800N04 residual chlorine/total chlorine/chlorine dioxide kit for DGB-403F

$ 124.00
HANNA HI9829-11042 high-precision multiparameter Water Quality Analyzer pH/ORP/EC/DO/turbidity 4 meters probe 230V

$ 8244.00
Bante980 laboratory Dissolved Oxygen Meter

$ 467.00

Genuinegoods

JENCO 9010M Portable dissolved oxygen TesterOverview
Specifications
Comments
FAQs

9010M

Portable dissolved oxygen Tester

Introduction

The 9010M is a dissolved oxygen Detector that is suitable for general use, easy to use, and can access up to 50 data records. The 9010M uses polarographic detection to obtain data.

Features

Conductivity/salinity or one of the total solids capacity is displayed at the same time as the temperature measurement
Access up to 50 data items
Convenient single-point correction
Automatic temperature compensation of dissolved oxygen data
The user can select salinity and pressure to compensate for the dissolved oxygen data
The polarographic formula has an automatic break
Electric function (after 45 seconds of inactivity)
The battery life is more than 500 hours
IP-65 waterproof enclosure
Low battery indication
This product is RoHS and EU certified

Product display diagram

Illustration of Ren's JENCO 9010M portable dissolved oxygen Tester

JENCO 9010M Portable dissolved oxygen TesterSpecifications

LIST	VALUE
DO range	0.00~20.00ppm
DOS resolution	0.01ppm
Accuracy of air saturation	±0.5%FS
Air saturation range	0.0~200.0%
Air saturation resolution	0.1%
Accuracy of air saturation	±0.5%FS
Measurement range	-6.0~46.0℃
Temperature Resolution	0.1℃
Measurement Accuracy	+/- 0.3 ℃ +/- 1 word
Pressure compensation range	600~1100mBar adjustable, the default value is 1013mBar
Salinity compensation range	0.0~40.0ppt adjustable, the default value is 0.0ppt
Electrode type	polarography
calibration data store	Yes, 50 sets.
Automatic temperature compensation	Yes.
Power Supply	9V battery
Environmental temperature	0~50℃
Weight	About 260g (without battery)
DO Measurement Accuracy	± 0.5% FS
Working Relative Humidity	<90%
size	186x70x37mm

JENCO 9010M Portable dissolved oxygen Tester Packing list

Host X1, LD-900-11 electrode X1, LD-900-3A electrode film head X1, 9V battery X1, suitcase X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Portable dissolved oxygen meter for sewage measurement, range 20, this one is OK?

[A]

Sure

[Q]

JENCO 9010M dissolved oxygen instrument with what type of electrode?

[A]

Hello, JENCO 9010M is specially equipped with a primary battery type dissolved oxygen electrode: LD-900-11, this dissolved oxygen electrode has a built-in temperature transducer, which can automatically sense the temperature.

[Q]

Why does Ren's 9010M display "Udr"?

[A]

Hello, Udr incorrectly indicates that your north side solution temperature is lower than -6 ° C.

[Q]

How does Ren's 9010M dissolved oxygen meter test the dissolved oxygen value?

[A]

Hello, 1. Press the "MODE" button to select the "dissolved oxygen -%" or "dissolved oxygen - ppm (mg/L) " mode. 2. Wash the dissolved oxygen electrode with distillation water and put it into the tested solution, which should be constantly stirred (the flow speed of the tested solution is about one foot per second, and the magnetic force can be used to Stirrer Stir). 3. After the value to be read is stable, it is the dissolved oxygen value of the tested solution.

[Q]

What power supply does Ren's 9010M dissolved oxygen tester use? What electrode?

[A]

Hello, this JENCO 9010M uses a 9V battery to provide power, and comes standard with an LD-900-11 electrode.

1 2 Next Last

+JENCO 9010M Portable dissolved oxygen Tester Big data

+JENCO 9010M Portable dissolved oxygen TesterSimilar products

Bante821 standard portable Dissolved Oxygen Meter DO100 dissolved Oxygen electrode
$ 467.00
Compare

+JENCO 9010M Portable dissolved oxygen TesterKnowledge

+JENCO 9010M Portable dissolved oxygen TesterStandard

+Navigation