JENCO PH630 pen pH temperature Tester PH value Range: 0.00~14.00pH

Introduction to JENCO 630 Pen Type pH Temperature Tester

1. Super large dot matrix liquid crystal (pH618N/ORP628N)/LCD (pH630) display.

2. Can display pH/ORP, temperature, date and time at the same time (pH618N/ORP628N).

3. 1 point, 2 point or 3 point correction.

4. The electrode head can be replaced by yourself.

5. 50 sets of test data storage.

6. Built-in two sets of USA/NIST standard solution formats (pH630/pH618N).

7. IP67 waterproof housing.

8. Low battery reminder function, battery life exceeds 300 hours.

9. CMC, CE, lead-free certification.

operating mode

pH630 has 4 modes:

1. Measurement mode: used to measure pH value and temperature value.

2. Calibration mode: used to calibrate 1, 2 or 3 points.

3. Lock mode: used to lock measured values.

4. Standard solution selection mode: used to select the standard solution group.

(7.00/4.01/10.01) or 6.86(6.86/4.00/9.18).

Product Structure

1. Display of standard solutions and calibration points

2. Low battery indicator 

3. Calibration mode display

4. Lock mode display

5. pH reading

6. Temperature reading (℃)* 

7. Temperature reading (℉)* 

Product display picture

host X1, battery X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.