JENCO 9173 desktop dissolved oxygen (DO) Tester, dedicated to laboratories
0~20ppm, 0~200.0%, -6~ 50.0 ℃, salinity compensation range 0~40.0ppt, pressure compensation range 600~1100mBar.
JENCO-
COD standard solution 1500mg/L, 250mL suitable for COD-571, DGB-401
$ 105.00 -
HANNA HI76407A/P special PTFE dissolved oxygen membrane
$ 214.00 -
Bante DO-8 portable Dissolved Oxygen Meter with US DO100 dissolved Oxygen electrode
$ 427.00 -
HANNA HI97751 Sulfate Portable Photometer
$ 540.00 -
JINGQI WD9102B Portable Water Quality Tester, Total Phosphorus
$ 1316.00
Introduction
The dissolved oxygen Tester uses an extra-large LCD display panel, which is easy to use. Uses polarographic sensors, interchangeable diaphragms, programmable pressure compensation, 600 to 1000 mBar, salinity compensation, 0 to 40.0 ppt. Dissolved oxygen and temperature are displayed on the dual-display LCD screen, and RS-232-C interface. The ATC is a 10K thermal resistor and uses a 115/230V mixer or battery.
High Definition LCD panel display (4 1/8 x 3 1/16 in.)
The high-definition LCD panel displays the amount of dissolved oxygen: air saturation ratio or dissolved oxygen per 1,000 parts, and the temperature can also be displayed at the same time
Temperature-compensated dissolved oxygen data is performed manually or automatically
The user can select salinity and pressure to compensate for the dissolved oxygen data
Polarographic detection allows users to obtain accurate and reliable data
Convenient single-point calibration, dissolved oxygen calibration data can be stored, and it can be used right out of the box
Auto-lock mode with auto-sensing shutdown to keep your data safe
The touch & voice membrane keypad allows you to operate the instrument intuitively
The water-repellent housing is made of durable, reinforced plastic for added protection and includes a connector protective cover
Offset LCD panels are protected against damage caused by carelessness.
The small body does not take up desk space
RS-232 specification computer interface
8 pin DIN connector for dissolved oxygen and thermal resistor
Use the power supply as a power mixer or battery

| Standard configuration | |
9173 | Main engine, LD-900-7 electrode, LD-900-3A electrode membrane head, 007A universal electrode holder, AC Voltage regulator source, battery |
9173R | Host, LD-900-7 electrode, LD-900-3A electrode membrane head, 007A electrode holder, AC Voltage regulator source, battery, software, data cable |
JENCO 9173 Dissolved oxygen (DO) TesterSpecifications
| LIST | VALUE |
|---|---|
| DO range | 0.00~20.00ppm |
| DOS resolution | 0.01 |
| DO Measurement Accuracy | ±0.2%FS |
| Electrode type | Polarographic electrode |
| DO temperature compensation range | -6.0~46.0℃ |
| Pressure compensation range | 600~1100mBar adjustable, the default value is 1013mBar |
| Salinity compensation range | 0.0~40.0ppt adjustable, the default value is 0.0ppt |
| calibration data store | Yes. |
| Power Supply | AC power converter (output: DC9V) or 6 1.5 volt 5 #batteries |
| Environmental temperature | 0~50℃ |
| Dimensions | 230*165*80mm |
| Weight | 650G (without battery) |
| Air saturation range | 0.0~200.0% |
| Air saturation range | 0.1% |
| Accuracy of air saturation | ± 0.2% FS |
| Measurement range | -6.0~46.0℃ |
| Temperature Resolution | 0.1℃ |
| Measurement Accuracy | ±0.3℃ |
| Electrode type | polarography |
| DO temperature compensation | automatic |
| Working Relative Humidity | <90% |
JENCO 9173 Dissolved oxygen (DO) Tester Packing list
Host X1, LD-900-7 electrode X1, LD-900-3A electrode film head X1, 007A body electrode bracket X1, AC voltage source X1, battery X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Ren's JENCO 3671 pH/ORP Controller Instruction Manual
- Ren's JENCO 3621 Microcomputer pH/ORP Controller Instruction Manual
- Ren's JENCO 3331 Microcomputer Conductivity Detector/resistivity transmitter manual
- Ren's JENCO MODEL 3321 Microcomputer Conductivity Detector/resistivity controller Instructions for use
- Ren's JENCOMODEL 3250M Microcomputer Processing Conductivity Detector/TDS/salinity/temperature Portable measuring instrument Operation manual
- JENCO MODEL 3173 Microcomputer Processing Conductivity Detector Benchtop measuring instrument Instruction manual
- Ren's JENCO 3107 Microcomputer Desktop Conductivity Detector Instruction Manual
- Ren's JENCO ORP 628N Microcomputer Type ORP & Temperature Test Pen Instructions for Use
- Ren's JENCO3010M laboratory conductivity meter instruction manual
- Ren's JENCO692 pH Transmitter Instructions for Use
- ActiveJJF 1714-2018
- ActiveJJF 1565-2016
- ActiveJJF 1441-2013
- ActiveJJG 2104-2024
- Active 096-2007
- ActiveSC/T 7006-2001
- AbolishGB/T 12157-2007
- ActiveGB/T 20245.4-2013
- ActiveGB/T 12157-2022
- ActiveGB/T 1576-2018
- ActiveHJ 2515-2012


9173






