German erichsen 295/I Lacquer Cross Hatch Cutter 6-tooth multi-blade adhesion cross-cut instrument

The Erichsen295 lacquered scratch cutter meets all mark test criteria. It consists of a plastic handle and a cutter head mounted on it, which can be adjusted to the most comfortable position for the operator. Different types of bits are available, and an EN ISO 2409 compliant tape is available.

The Erichsen295 scratching instrument is supplied in a complete range of products, including a cutter head mounted on a plastic handle. It comes in a sturdy plastic carrying case, and also contains a nylon brush and a 2.5x magnifying glass. For the 295/III single-edged bits, a folding ruler is also available. The instrument also comes with a manufacturer's certificate M.

Comparison of the parameters of the Erichsen griddle series

1. After 1994, the European standard ENISO2409 replaced the national standard DIN53151, BS3900:E6, NFT30-38, NEN5337 and SIS184172.

2. After the scratch test, you can also do a deep drawing test (ENISO1520). Deep drawing experiments can be performed with the following instruments:

ERICHSEN CUP-CONVEX TESTER, MODEL 200, 202, 202C OR 204

Complies with ASTMD3359 impact test set 304ECCA

3. on soft substrates.

4. on hard substrates.

Cross Hatch Cutter × 1, Paper Encasement Box × 1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.