Baoda PT-6081BPL Computer Peel strength Tester 20kg
Baoda PT-6081BPL computer Peel strength Tester capacity of 20kg, is a better than +/- 1% computer Tensile Tester, test stroke up to 650mm, PT-6081BPL in line with ASTM D903, GB/T2790, JIS K6854 and other standards.
Perfect
PT-6081BPL(20kg)
-
JINGWEN JW103CW02-100N horizontal heat seal Peel strength Tester 0.5 grade/100N
$ 1543.00 -
JINGWEN JW103CW02-200N horizontal heat seal Peel strength Tester 0.5 grade/200N
$ 1543.00 -
JINGWEN JW-110C interlayer disbonding Tester, Interlayer Bonding Strength Tester
$ 4590.00 -
JINGWEN JW103CW02-300N horizontal heat seal Peel strength Tester 0.5 grade/300N
$ 1543.00 -
Jinan HORIZON BLJ-100 electronic disbonding Tester 100N
$ 2048.00
Introduction
PT-6081BPL Computerized Peel Strength Tester is a test instrument designed and developed by the company for the adhesive tape and adhesive industry, and is used for peel strength testing of various adhesive products in different ways. Different fixtures can be used to do peel tests such as 180°, 90°, T-shaped and floating roller method (suitable for high-strength adhesives), as well as adhesive tensile shear strength and splitting strength.
Meets standards
ASTM D903、GB/T2790、GB/T2791、GB/T2792、CNS11888、JIS K6854、JIS PSTC7
Software Introduction
The professional testing software conforms to the relevant provisions of more than 30 national standards such as GB228-87 and GB228-2002, and can be tested and processed according to GB, ISO, JIS, ASTM, DIN and a variety of standards provided by users, and has good scalability.
Peel fixture type
Perfect PT-6081BPL(20kg) Peel strength TesterSpecifications
| LIST | VALUE |
|---|---|
| Capacity selection | 20kg |
| Force Precision | <±1% |
| force resolution | 1/500000 |
| force resolution | 1/10000 |
| Measurement range | 1~100%F.S |
| Precision indication | Better than +/- 1% |
| Test speed range | 0.5~500mm/min |
| effective travel | ≤ 650mm (without fixture) |
| Test space | Φ120mm |
| Force unit | Measurement units including SI units, users can also customize the required units |
| shutdown mode | Upper and lower limit safety settings, emergency stop button, program power and elongation settings, test piece damage sensing |
| test project | Can do tension, pressure and fatigue test (optional function) |
| Dimensions | 570*470*1200mm |
| Weight | Approx. 70kg |
| Power system | Stepping motor |
| Power supply Voltage | 1PH，AC220V，50Hz，10A或指定 |
Perfect PT-6081BPL(20kg) Peel strength Tester Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Test method for tensile strength of fabrics
- Effect of Printing ink on Adhesion Fastness of Composite Films
- Detailed Explanation of Coating Adhesion Determination Method
- How much do you know about the maintenance and safety of Tensile machines?
- Analysis of Dynamic Tensile Test Method for Concrete
- Isoaxial tensile test method and simulation for analyzing super-elasticity films
- Tensile machine fault analysis and repair
- What performance tests must be performed on the protective film?
- Type of adhesive peel test
- Experimental steps for performance testing of Spreader solution for interface modification
- ActiveQB/T 4449-2013
- ActiveGB/T 42921-2023
- ActiveYY/T 0148-2006
- ActiveASTM D6252/D6252M-2019
- ActiveGB/T 2792-2014
- AbolishHG/T 2406-2002
- AbolishHG/T 3658-1999