XINGHUO ZTT-201C Multi-angle protruding road sign Measurement Instrument, touch screen version voice broadcast
ZTT-201C multi-angle reflective stud Measurement Instrument (touch screen voice broadcast version) is an instrument for measuring the main performance index of reflective studs - luminous intensity coefficient. ZTT-201C is suitable for metering laboratories, testing centers, traffic management departments and branch construction sites, etc
TianDiXingHuo
ZTT-201C
ZTT-201A
-
YUZHOU PG-2C metallographic sample polishing machine, double disc independent operation, large disc diameter
$ 549.00 -
Domestic (CN) ZY-YZ-3 roller press, wet pattern experimental equipment 300mm width 80N/mm line pressing
$ 5201.00 -
CHINA ZY-KGZ-2S Double station pattern rapid drying device
$ 4734.00 -
XINGHUO ZTT-910A Reflective film anti-stick paper disbonding performance Tester
$ 503.00 -
YOUKE YK3250 switch socket on-off Life Cycle Tester, pneumatic 4-station live life test
$ 1734.00
ZTT-201C multi-angle reflective road stud measuring instrument (touch screen voice broadcast version) is an instrument for measuring the main performance index of reflective road studs - luminous intensity coefficient. The instrument is suitable for photometry laboratories, testing centers, traffic management departments and branch road construction sites, etc.; it is also suitable for product quality inspection by reflective road stud manufacturers. The measuring object of this instrument is a rectangular reflective road stud.
The main technical basis for the design of ZTT-201C multi-angle reflective road stud measuring instrument is my country's national standard GB 8416-2003 "Visual Signal Surface Color", GB/T 3978-2008 "Standard Lighting Body and Geometric Conditions", GB/T 3979-2008 "Measurement Method of Object Color" and GB/T 24725-2009 "Reflective Road Stud". It meets the technical requirements of my country's GB/T 26377-2010 "Retroreflection Measuring Instrument". Also refer to the relevant standards of other countries (such as ASTM-810, ASTM-E809, DIN 67520). The Detector of the instrument meets the requirements of CIE (International Commission on Illumination) standard photometric observer, the color temperature of the light source meets the CIE standard A light source, and the geometry of the instrument The conditions are in accordance with the provisions of CIE Technical Document No. 54. Therefore, the technical conditions of the instrument are consistent with those in the world.
ZTT-201C multi-angle reflective road stud measuring instrument is composed of optical system, Detector, light source, amplifier, calibrator and instrument calibration block and other parts.
TianDiXingHuo ZTT-201C Protrusion road sign Measurement InstrumentSpecifications
| LIST | VALUE |
|---|---|
| Observation angle (α) | 0.2 °~ 2.0 ° continuously adjustable |
| Incident angle (including β 1 and β 2) | Beta 1 is +/- 0 ° and Beta 2 is +/- 0 °、 +/- 5 °、 +/- 1 0 °、 +/- 1 5 °、 +/- 2 0 ° |
| Detector | Silicon diode + V (λ) correction (CIE standard photometric observer) |
| Light source Color temperature | 2856K (CIE Standard A Light source) |
| Measurement range | 0~3000 mcd•lx-1 |
TianDiXingHuo ZTT-201C Protrusion road sign Measurement Instrument Packing list
Touch screen host X1, (white and yellow) calibrate block X1 each, indoor angle plate X1, outdoor angle plate X2, charger X1, card reader X1, certificate X1, warranty card X1, manual X1, calibrate certificate (factory) X1, instrument case X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.