LEBO PF400 Experimental Film Applicator Vacuum adsorption

The PF400 coater is used to prepare a uniform coating film because the factors that affect the coating film are the shear rate and the additionThe weight on the construction tool. The device uses a precisely controlled wire rod or applicator at a selected speeddegrees to move back and forth. Since the test strip is flatly adsorbed on the flat plate and the shear rate and application of the film are applied during the coatingThe force on the coating remains constant, which greatly improves the reproducibility of the coating film. At the same time, the aluminum alloy mirror is grindingFlat panels to ensure a flat panel.

Interface features

The PF400 Film Applicator utilizes a designed vacuum piping system to connect an external Vacuum Pump to a vacuum panel.The substrate can be tightly adsorbed on the vacuum panel by vacuum negative pressure. The customer can choose according to the size of the substrateAdjust the vacuum adsorption range using A4 or A3.

Loading the coating process

When you press the "Load" button on the coating operation screen, you will be taken to the interface shown in the image below.

Attachment selection

Four specifications of adjustable Film Applicator are available, the wet film range is 0-3500μm, and the film width is 55mm.100mm, 150mm, 200mm four kinds of options. Other specifications need to be customized.

The length of the wire bar applicator is 400mm, and the wet film thickness is available in a variety of specifications (range from 6 to 200 μm).

A VPC200 Vacuum Pump is supplied as standard.

Optional

PF400-H device X1, touch screen pen X1, film applicator X1, power cord X1, product manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.