DAKOTA ZX-5 Ultrasonic Thickness Gauge

DAKOTA ZX-5 Ultrasonic Thickness Gauge Measurement range 1.0~152mm (steel), Probe Frequency 5MHz, optional manual or automatic zeroing, ZX-5 Ultrasonic Thickness Gauge Speed of sound range 305~ 18542m/s, Protection level IP65, Operating temperature -30~75 ℃.

Brand

SKU: NB029546

DAKOTA

Model

ZX-5

Get Quote

DAKOTA

Information

Datasheet Catalog

What else did others buy

Genuinegoods

DAKOTA ZX-5 Ultrasonic Thickness GaugeOverview
Specifications
Comments
FAQs

ZX-5

Ultrasonic Thickness Gauge

The ZX Series Thickness Gauges provide a performance solution that can withstand the harshest industrial conditions. The features included in the ZX Series provide high-quality tools that meet or exceed the requirements of your application

Features

Technical support: 120MHz FPGA timing.
150 volt square wave pulse generator.
Pulse-echo measurements.
Adjustable gain (40-52dB) in 3dB steps (vlow, low, med, high, vhi).
You can choose between manual or automatic zeroing.
Dual-element sensor (1-10MHz option)
Low-temperature custom LCD display (-22 F/-30C)
USB-C connection (ZX-5 series).
CDC compatible serial via USB.Optional serial RS232 or Bluetooth module (ZX-5).
Data storage: 32 megabit flash memory (ZX-5 DL).
IP65 degree of protection.

Probes are optional

Model	frequency	Element diameter	Diameter of the wear surface	Measuring range	illustrate
PT-102-2000	5.0MHz	6.35mm	9.53mm	1.0～152mm	Standard probes
PT-101-2000	5.0MHz	4.76mm	6.35mm	1.0～50mm	Small diameter probes
PT-104-0000	1.0MHz	12.7mm	15.88mm	3.8~50.8mm(Medium Cast Iron)	Cast iron probe
PT-102-3300	7.5MHz	6.35mm	9.53mm	0.63～152mm	Ultra-thin probe
PT-104-2000	5.0MHz	12.7mm	15.88mm	1.27～508mm	Extra-thick probe
PT-042-2000	5.0MHz	6.35mm	9.53mm	1.0～152mm	Standard high-temperature probe up to 340°C
PT-044-2000	5.0MHz	12.7mm	15.88mm	1.27～508mm	Ultra-thick high-temperature probe up to 340°C
PT-212-2001	5.0MHz	6.35mm	9.53mm	1.0～152mm	Ultra-high temperature probe up to 480°C
PT-214-2001	5.0MHz	12.7mm	15.88mm	1.27～508mm	Ultra-thick ultra-high temperature probe up to 480°C

DAKOTA ZX-5 Ultrasonic Thickness GaugeSpecifications

LIST	VALUE
Measurement range	1.0~152Mm (steel)
Probe Frequency	5MHz
Probe model	PT-102-2000 Standard Probe
Probe diameter	Φ6.3mm
Probe line length	1.2m
Display resolution	0.01mm/0.001IN
Display	Large screen multi-function low temperature LCD display
backlight function	Off/normally open/automatic three Operating Modes, luminance has low/medium/high three, gear adjustable
scanning method	100 point measurements per second to capture the thinnest values during scanning
Difference Mode	Displays the difference between the Measured value and the preset value.
Alarm function	If the Measured value is less than the minimum allowable value input by the user/higher than the maximum allowable value input by the user, the red light is on and there is an alarm sound prompt of BB, and the green light is on to indicate that the measurement is within the allowable range.
VX Speed of sound	Can measure the Speed of sound
unit system	mm/inch
Speed of sound	305~18542m/s
zero	Manual or automatic zeroing
Gain range	40~52dB (step spacing 3dB)
Pulse, repeability Frequency	200Hz
Display refresh rate	10Hz
keyboard	9-Key waterproof, oil-resistant keyboard
Environmental temperature	-30℃~75℃
Host size	63.5131.331.5mm
Weight	312G (including battery)
Applicable standard	NIST & MIL-STD-4562A
Protection level	IP65
Environmental temperature	-30~75℃
Power Supply	2 AA batteries, continuous use time up to 45 hours (the use time of different battery types will vary). When the battery power is insufficient, the monitor will display a low battery sign. Automatic shutdown function (it will automatically shut down after 5 minutes without any operation). USB interface Power Supply function

DAKOTA ZX-5 Ultrasonic Thickness Gauge Packing list

host X1, PT-102-2000 probe, coupling agent X1, No. 5 battery X2, factory certificate x1, Chinese and English instructions x1, instrument case x1.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.