DAKOTA ZX-5DL Ultrasonic Thickness Gauge
DAKOTA ZX-5DL Ultrasonic Thickness Gauge Measurement range 1.0~152mm (steel), Probe Frequency 5MHz, Probe diameter φ 6.3mm, ZX-5DL Ultrasonic Thickness Gauge measurement 100 points per second, can capture the thinnest value during scanning.
DAKOTA-
DONGRU DR85S Ultrasonic Thickness Gauge 400mm/0.01mm
$ 167.00 -
TSINGTAO TOKY UM6500 Ultrasonic Thickness Gauge 1.0~300mm
$ 161.00 -
AMITTARI AT-140A Ultrasonic Thickness Gauge 0.1mm resolution Probe diameter φ 8mm, 5HZ
$ 327.00 -
Defelsko PosiTector UTG M3 ultrasonic wall thickness Measurement Instrument paints penetration function, wear-resistant aluminum oxide probe
$ 2625.00 -
D7006 (Concave Curved Surface) Ultrasonic Thickness Gauge Probe
$ 242.00
The ZX Series Thickness Gauges provide a performance solution that can withstand the harshest industrial conditions. The features included in the ZX Series provide high-quality tools that meet or exceed the requirements of your application
Features
Technical support: 120MHz FPGA timing.
150 volt square wave pulse generator.
Pulse-echo measurements.
Adjustable gain (40-52dB) in 3dB steps (vlow, low, med, high, vhi).
You can choose between manual or automatic zeroing.
Dual-element sensor (1-10MHz option)
Low-temperature custom LCD display (-22 F/-30C)
USB-C connection (ZX-5 series).
CDC compatible serial via USB.Optional serial RS232 or Bluetooth module (ZX-5).
Data storage: 32 megabit flash memory (ZX-5 DL).
IP65 degree of protection.
Probes are optional
| Model | frequency | Element diameter | Diameter of the wear surface | Measuring range | illustrate |
| PT-102-2000 | 5.0MHz | 6.35mm | 9.53mm | 1.0~152mm | Standard probes |
| PT-101-2000 | 5.0MHz | 4.76mm | 6.35mm | 1.0~50mm | Small diameter probes |
| PT-104-0000 | 1.0MHz | 12.7mm | 15.88mm | 3.8~50.8mm(Medium Cast Iron) | Cast iron probe |
| PT-102-3300 | 7.5MHz | 6.35mm | 9.53mm | 0.63~152mm | Ultra-thin probe |
| PT-104-2000 | 5.0MHz | 12.7mm | 15.88mm | 1.27~508mm | Extra-thick probe |
| PT-042-2000 | 5.0MHz | 6.35mm | 9.53mm | 1.0~152mm | Standard high-temperature probe up to 340°C |
| PT-044-2000 | 5.0MHz | 12.7mm | 15.88mm | 1.27~508mm | Ultra-thick high-temperature probe up to 340°C |
| PT-212-2001 | 5.0MHz | 6.35mm | 9.53mm | 1.0~152mm | Ultra-high temperature probe up to 480°C |
| PT-214-2001 | 5.0MHz | 12.7mm | 15.88mm | 1.27~508mm | Ultra-thick ultra-high temperature probe up to 480°C |
DAKOTA ZX-5DL Ultrasonic Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 1.0~152Mm (steel) |
| Probe Frequency | 5MHz |
| Probe model | PT-102-2000 Standard Probe |
| Probe diameter | Φ6.3mm |
| Probe line length | 1.2m |
| Display resolution | 0.01mm/0.001IN |
| Display | Large screen multi-function low temperature LCD display |
| backlight function | Off/normally open/automatic three Operating Modes, luminance has low/medium/high three, gear adjustable |
| scanning method | 100 point measurements per second to capture the thinnest values during scanning |
| Difference Mode | Displays the difference between the Measured value and the preset value. |
| Alarm function | If the Measured value is less than the minimum allowable value input by the user/higher than the maximum allowable value input by the user, the red light is on and there is an alarm sound prompt of BB, and the green light is on to indicate that the measurement is within the allowable range. |
| VX Speed of sound | Can measure the Speed of sound |
| unit system | mm/inch |
| Speed of sound | 305~18542m/s |
| zero | Manual or automatic zeroing |
| Gain range | 40~52dB (step spacing 3dB) |
| Pulse, repeability Frequency | 200Hz |
| Display refresh rate | 10Hz |
| keyboard | 9-Key waterproof, oil-resistant keyboard |
| Environmental temperature | -30℃~75℃ |
| Host size | 63.5*131.3*31.5mm |
| Weight | 312G (including battery) |
| Applicable standard | NIST & MIL-STD-4562A |
| Protection level | IP65 |
| Environmental temperature | -30~75℃ |
| Power Supply | 2 AA batteries, continuous use time up to 45 hours (the use time of different battery types will vary). When the battery power is insufficient, the monitor will display a low battery sign. Automatic shutdown function (it will automatically shut down after 5 minutes without any operation). USB interface Power Supply function |
| Data storage | The built-in 32M memory card can store 10,000 measurement data (divided into 40 storage files, each storage file can store 250 data). The storage file format is a universal .csv format, no special data communication software is required. |
DAKOTA ZX-5DL Ultrasonic Thickness Gauge Packing list
host X1, PT-102-2000 probe, coupling agent X1, No. 5 battery X2, factory certificate x1, Chinese and English instructions x1, instrument case x1.
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Principle of Portable Ultrasonic Thickness Gauge
- Measurement principle and influencing factors of high temperature ultrasonic Thickness Gauge
- Types and Usage Methods of Coupling Agent for Thickness Gauges
- The Principle, Application and Precautions of Copper Plate Ultrasonic Thickness Gauge
- Principle, Application and Selection of Ceramic Ultrasonic Thickness Gauge
- Principle, Application and Type Selection of Ultrasonic Thickness Gauge
- Principle, Application and Type Selection of Ultrasonic Thickness Gauge


ZX-5DL





