DAKOTA ZX-6 Ultrasonic Thickness Gauge with PT-102-2700 Probe

DAKOTA CORPORATION, USA ZX-6 series ultrasonic Thickness Gauges are adoptedEcho-to-echo measurement mode that provides coating penetration – measures the net thickness of the material without removing the paint when there is paint on the surface of the object to be measured.  

Features

• 120MHz FPGA sequential circuit design 150V square wave pulser 

• Pulse-echo measurement mode and echo-echo (through coating) measurement mode 

• 40~52dB adjustable gain in 3dB steps, selectable ultra-low, low, medium, high, ultra-high time-dependent gain (TDG) 

• Manual or automatic probe zeroing can be selected 

• Dual Element Transducer (1~10MHz Optional) 

• Low temperature custom LCD display (-30°C) 

• USB Type-C data interface 

• CDC-compatible interface with optional serial RS232 or Bluetooth module (ZX-6) 

• 32M flash internal data memory (ZX-6DL) IP65 rating 

measurement

• Pulse-echo mode measurement range: 0.63~914.4mm(steel) 

• Echo-echo mode measurement range: 2.54~152mm 

• Coating range 0.0254~1.905mm Depends on material, probe frequency and diameter Units: Imperial and Metric 

• Resolution: 0.01mm 

• Sound velocity range: 305~18542m/s pulse repetition rate: 200Hz 

• Display refresh rate: 10Hz 

• Gain: 40~52dB, 3dB step Time-Dependent Gain (TDG):  

• Depending on the probe selected and frequency, it is available in pulse-echo and echo-echo modes 

probe

• Frequency range: 1~10MHz 

• Dual element transducers 

• LEMO Interface, 1.2 m Probe Cable Probes can be customized for special applications 

• Probe Zeroing: Manual and Automatic Zeroing Probe Type: Probe frequency and diameter can be selected to improve linearity 

• High-speed scan mode: Displays the minimum reading during the scan at 100Hz Difference mode: Displays the difference between the measured value and the entered nominal value 

• Alarm mode: upper and lower limit sound and light alarm Sound velocity measurement mode: used for the measurement of nodularity 

display

• Multi-function 7-segment 4-and-a-half-digit LCD with a digital height of 12.7mm 

• Two 3.2mm high 14-segment display areas and one 7-segment display area for information and values 

• Additional icons indicate functions and modes Backlight selectable on/off/auto, three degrees (low, medium, high) options  

• Reading stability/repeatability indication of the bar 

keyboard

• Waterproof and oil-repellent sealed key film Nine haptic feedback buttons 

power supply

• Two gauge 5 alkaline batteries are standard, optional nickel-cadmium batteries or lithium batteries, and the battery is low indicated 

• Automatically shuts down the Type-C power supply after five minutes of no operation 

storage

• Stores 40 groups of 250 data for a total of 10,000 data (ZX-6DL) 

enclosure

• Extruded aluminum shell, bottom cover is nickel plate aluminum, environmentally friendly packaging 

Probe model

host X1, PT-102-2700 probe, coupling agent X1, No. 5 battery X2, factory certificate x1, Chinese and English instructions x1, instrument case x1.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.