Language
Search
    Cart(0)
      总价元
      前往结算
      您的购物车是空的 : )
      All Categories
        Home> STIP-scan> JENCO> JENCO 6308DT Dissolved oxygen (DO) temperature controller
        JENCO 6308DT Dissolved oxygen (DO) temperature controller

        JENCO 6308DT on-line dissolved oxygen (DO) temperature controller

        DO (0~40.00ppm), 4~ 20mA reversible isolated output, five sets of relay control, RS-485 interface

        Brand
        SKU: NB002956
        United States JENCO
        Model
        Get Quote
        VS
        JENCOLOGO

        JENCO shopSE

        Information
        Datasheet Catalog Manual
        What else did others buy
        Genuinegoods

        • JENCO 6308DT Dissolved oxygen (DO) temperature controllerOverview

        • Specifications
        • Comments
        • FAQs
        6308DT
        Dissolved oxygen (DO) temperature controller
        • JENCO 6308DT on-line dissolved oxygen (DO) temperature controller
        DO (0~40.00ppm), 4~ 20mA reversible isolated output, five sets of relay control, RS-485 interface

        Introduction

        • Standard 1/4 DIN waterproof body design

        • 128x64 dot matrix backlit LCD display, can display pH value, temperature value at the same time

        • Polarographic dissolved oxygen sensor is used

        • 4~20mA reversible, with isolated current output, the output range can be set by the user

        • Three sets of pH relay control/one set of temperature relay control, the control point/hysteresis width can be set by the user

        • It has the function of automatic temperature compensation

        • Power-off correction value memory function

        • RS-485 communication interface is adopted

        • The products have passed CE certification

          JENCO 6308DT In-Line Dissolved Oxygen (DO) Temperature Controller

        6308DT Industrial In-Line Dissolved Oxygen (DO) Temperature Controller Optional Accessory


        		ModelIntroduction
        electrodeOXYSENS 120Sewage and aquaculture fields
        OXYFERM 120High-temperature fermentation system
        cableOXYFERM 120 special cable3m/5m/10m/15m line length
        Sheath tube009B1 meter tube length
        Special sheath for OXYFERM 120
        The electrodes are seatedThe OXYFERM 120 is dedicated to seating
        Sealed box011-200-00Dial-mounted
        012-200-00Wall-mounted


        VS

        JENCO 6308DT Dissolved oxygen (DO) temperature controllerSpecifications

        LIST VALUE
        DO range 0.00~40.00ppm
        DOS resolution 0.01ppm/0.1%
        Salinity compensation range 0.0~49.9ppt
        Temperature compensation range -10.0~80.0℃
        Pressure compensation range 600~4000mBar
        Measurement range -10.0~120.0℃
        Temperature Resolution 0.1℃
        temperature sensor Thermistor, 22K/25 ℃
        current output 4~ 20mA reversible, isolated current output
        Insulation Voltage/maximum load 500VDC/550Ω
        Control mode In-system ON/OFF control
        Maximum load 2.5A/230VAC
        key All have sound feedback effects
        Dimensions 96*96*148mm
        opening size 92*92mm
        Protection level IP65
        Weight 960g
        Power Supply 230VAC,50/60Hz
        Shop Accessories Electrode, cable, protective cover, electrode seat, sealing box
        Measurement Accuracy ±0.3℃
        DO Measurement Accuracy ±0.2%FS
        DO% Measurement range 0.0~400.0%

        JENCO 6308DT Dissolved oxygen (DO) temperature controller Packing list

        host X1, manual X1, certificate X1, warranty card X1

        [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

        FAQ

        [Q]
        The film of the dissolved oxygen probe of JENCO6308DT is a little loose, will it affect the test error value?
        [A]
        Hello, yes. When the film is loose, wrinkled, polluted, damaged or bubbled in the electrolysis solution, it will cause reading errors.
        [Q]
        Ren's 6308DT online dissolved oxygen temperature controller uses what type of Sensors?
        [A]
        Hello, Polarographic Dissolved Oxygen Sensors are used.
        [Q]
        Is the 6308DT dissolved oxygen temperature controller to be zero-corrected or saturation-corrected first?
        [A]
        Hello, general users do not need to perform zero correction. If you want to perform zero correction (Z), you need to perform dissolved oxygen saturation correction (S) after zero correction.
        [Q]
        Excuse me, the current output is required to be 15mA. Does this one meet the requirements?
        [A]
        Hello, the current output of the 6308DT dissolved oxygen temperature controller is user-definable and ranges from 4 to 20mA.
        [Q]
        Does the jenco 6308DT need to be corrected after power failure?
        [A]
        Hello, Ren's 6308DT has the function of power-off correction value memory.
        +JENCO 6308DT Dissolved oxygen (DO) temperature controller Big data
          +JENCO 6308DT Dissolved oxygen (DO) temperature controllerSimilar products
          +JENCO 6308DT Dissolved oxygen (DO) temperature controllerKnowledge
          +JENCO 6308DT Dissolved oxygen (DO) temperature controllerStandard
          +Navigation
          JENCO
          JENCO 6308DT on-line dissolved oxygen (DO) temperature controller
          Service
          Order Guide
          Payment & Shipping
          After-sales
          Cooperation
          About Us
          Focus on online sales of Lab Testing Instruments

          CopyRight © NBchao.Com 2012-2024, All Rights Reserved.