DAKOTA N-110-0020 probe cable 3 meters
The DAKOTA probe line N-110-0020 is 3 meters long and is a matching probe line for the optional probe of the bolt stress monitor.
DAKOTA-
Defelsko C Standard 200C1-E Ultrasonic Thickness Gauge Coating thickness measurement of concrete, fiberglass, etc
$ 2959.00 -
Ultrasonic steel plate Thickness Gauge DC-2010C Deguang electronic measurement of steel plate material itself Film thickness
$ 810.00 -
KAIRDA HT5 (0~350 ℃) Ultrasonic Thickness Gauge Probe, High Temperature Resistant
Login -
Steel plate Ultrasonic Thickness Gauge DC-3000C, penetration coating measurement material Film thickness
$ 1312.00 -
SMART SENSOR AS860 Ultrasonic Thickness Gauge 1.2-225 mm Range 1% accuracy
$ 216.00
Introduction
The DAKOTA probe line N-110-0020 is 3 meters long and is a companion probe line to the optional probe of the bolt stress monitor.
The Dakota Bolt Monitor selects probe parameters
| probe | Model | parameter |
| Magnetic probes | PT-700-2405 | 5MHz/wafer Ø3.18mm |
| Magnetic probes | PT-700-4405 | 10MHz/wafer Ø3.18mm |
| Magnetic probes | PT-702-1405 | 2.25MHz/wafer Ø6.35mm |
| Magnetic probes | PT-702-2405 | 5MHz/wafer Ø6.35mm |
| Magnetic probes | PT-702-4405 | 10MHz/wafer Ø6.35mm |
| Magnetic probes | PT-703-1405 | 2.25MHz/wafer Ø9.53mm |
| Magnetic probes | PT-703-2405 | 5MHz/wafer Ø9.53mm |
| Magnetic probes | PT-704-1405 | 2.25MHz/wafer Ø12.7mm |
| Magnetic probes | PT-704-2405 | 5MHz/wafer Ø12.7mm |
| Magnetic probes | PT-706-1405 | 2.25MHz/wafer Ø19.95mm |
| Magnetic probes | PT-706-2405 | 5MHz/wafer Ø19.95mm |
| Non-magnetic probes | PT-5903-2875 | 5MHz/wafer Ø3.18mm |
| Non-magnetic probes | PT-5903-4875 | 10MHz/wafer Ø3.18mm |
| Non-magnetic probes | PT-5023-1855 | 2.25MHz/wafer Ø6.35mm |
| Non-magnetic probes | PT-5023-2855 | 5MHz/wafer Ø6.35mm |
| Non-magnetic probes | PT-5023-4855 | 10MHz/wafer Ø6.35mm |
| Non-magnetic probes | PT-5043-1855 | 2.25MHz/wafer Ø12.7mm |
| Non-magnetic probes | PT-5043-2855 | 5MHz/wafer Ø12.7mm |
| Probe wire | N-110-0020 | 3 m probe line |
| Probe wire | N-120-0020 | 6 m probe line |
| Calibration blocks | X-001-0011 | 76.2mm(3")/Steel |
| Calibration blocks | X-001-0010 | 76.2mm (3") and 152.4mm (6") / steel |
DAKOTA N-110-0020 Probe lineSpecifications
| LIST | VALUE |
|---|---|
| Probe line length | 3 meters |
DAKOTA N-110-0020 Probe line Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.


N-110-0020





