DAKOTA N-120-0020 probe line 6 meters
The DAKOTA probe line N-120-0020 is 6 meters long and is a matching probe line for the optional probe of the bolt stress monitor.
DAKOTA-
QILI UT400 Ultrasonic Thickness Gauge High Accuracy 0.001mm Metal Plastic Thickness measurement
$ 240.00 -
Deguang Electronics D7004 Ultrasonic Thickness Gauge Probe, mainly used for measurement of thin walls and small arcs
$ 322.00 -
Defelsko posiTector200 B Standard 200B1-E Ultrasonic Thickness Gauge Wood/Plastic coating thickness measurement
$ 2771.00 -
DONGRU DR89S Single Crystal Ultrasonic Thickness Gauge Standard 5P φ 10 Probe
$ 1606.00 -
AMITTARI AT-140A Ultrasonic Thickness Gauge 0.1mm resolution Probe diameter φ 8mm, 5HZ
$ 330.00
Introduction
The DAKOTA probe line N-120-0020 is 6 meters long and is a companion probe line to the optional probe of the bolt stress monitor.
The Dakota Bolt Monitor selects probe parameters
| probe | Model | parameter |
| Magnetic probes | PT-700-2405 | 5MHz/wafer Ø3.18mm |
| Magnetic probes | PT-700-4405 | 10MHz/wafer Ø3.18mm |
| Magnetic probes | PT-702-1405 | 2.25MHz/wafer Ø6.35mm |
| Magnetic probes | PT-702-2405 | 5MHz/wafer Ø6.35mm |
| Magnetic probes | PT-702-4405 | 10MHz/wafer Ø6.35mm |
| Magnetic probes | PT-703-1405 | 2.25MHz/wafer Ø9.53mm |
| Magnetic probes | PT-703-2405 | 5MHz/wafer Ø9.53mm |
| Magnetic probes | PT-704-1405 | 2.25MHz/wafer Ø12.7mm |
| Magnetic probes | PT-704-2405 | 5MHz/wafer Ø12.7mm |
| Magnetic probes | PT-706-1405 | 2.25MHz/wafer Ø19.95mm |
| Magnetic probes | PT-706-2405 | 5MHz/wafer Ø19.95mm |
| Non-magnetic probes | PT-5903-2875 | 5MHz/wafer Ø3.18mm |
| Non-magnetic probes | PT-5903-4875 | 10MHz/wafer Ø3.18mm |
| Non-magnetic probes | PT-5023-1855 | 2.25MHz/wafer Ø6.35mm |
| Non-magnetic probes | PT-5023-2855 | 5MHz/wafer Ø6.35mm |
| Non-magnetic probes | PT-5023-4855 | 10MHz/wafer Ø6.35mm |
| Non-magnetic probes | PT-5043-1855 | 2.25MHz/wafer Ø12.7mm |
| Non-magnetic probes | PT-5043-2855 | 5MHz/wafer Ø12.7mm |
| Probe wire | N-110-0020 | 3 m probe line |
| Probe wire | N-120-0020 | 6 m probe line |
| Calibration blocks | X-001-0011 | 76.2mm(3")/Steel |
| Calibration blocks | X-001-0010 | 76.2mm (3") and 152.4mm (6") / steel |
DAKOTA N-120-0020 Probe lineSpecifications
| LIST | VALUE |
|---|---|
| Probe line length | 6 meters |
DAKOTA N-120-0020 Probe line Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.


N-120-0020





