Hypertherm HT-300N Electronic Digital Display Spring Tension and Compression Tester

Introduction

HT series electronic digital display spring tension and compression testing machine is a special instrument for testing the deformation and load relationship characteristics of tensile and compression springs. It is suitable for testing the working load of a certain working length of a tensile and compression spring.

Features

◆ It has the function of holding the first peak during the test

◆ LCD screen, blue backlight

◆ High precision, high resolution, high sampling speed

◆ The upper and lower limit alarm values can be set, sound and light alarm, level signal output (can be set high-low)

◆ Store 200 sets of test data, and automatically calculate the average, maximum and minimum values of the stored data

◆ Three units of N, kgf, lbf are automatically converted

◆Peak hold, holding time can be set (0~99 seconds)

◆ Automatic shutdown without operation (time can be set freely for 0-99 minutes)

◆ Serial communication (can be easily configured for USB communication), computer display force value curve, force value table and other display methods and data processing: such asPrinting, statistical analysis, etc.

◆ Micro printers can be installed optionally

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.