JINGKELIAN QUL WFT gauge 0~500μm
Technical parameter ISO2808-1974, range 0~500μm, accuracy is not more than 5μm. Mainly used to determine the thickness of the painted surface wet-film and estimate the approximate thickness of the film when it dries.
JingKeLian
QUL（0-500）
QUL（0-150）
-
Pushen SHG 20-200 SHG comb WFT gauge 20-200μm
$ 106.00 -
SHG-700 wet-film gauge YONGLIDA film thickness range is 250~700μm
$ 116.00 -
TRUIT TR 5502/600 Double-sided wet-film Thickness Gauge 25~ 600μm
$ 111.00 -
YONGLIDA QUL-150 stainless steel WFT gauge film thickness 0-150μm
$ 135.00 -
YONGLIDA QUL-500 Stainless steel WFT gauge
$ 143.00
Introduction
The instrument is designed and manufactured in accordance with the requirements of the international standard ISO2808-1974 (E) "Paints and varnishes - Determination of paint film thickness". It is mainly used to measure the thickness of the wet film on the painted surface and roughly estimate the thickness of the film when it is dry Thickness, the instrument can be used for both laboratory and production control.
Schematic
JingKeLian QUL（0-500） wet Film Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Technical parameters | ISO2808-1974 |
| range | 0 ~ 500µm |
| Measurement Accuracy | Not more than 5μm |
JingKeLian QUL（0-500） wet Film Thickness Gauge Packing list
Instrument host X1, manual X1, certificate X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.