XINGHUO XHTC-10 high-precision Bond strength Tester

overview 

XHTC-10 high-precision bond strength Tester (referred to as Tester) is a new type of test instrument, which is developed for testing the positive tensile bond strength between mortar, putty, coating and other materials and concrete in civil engineering engineering. instrument. According to the bond strength and failure mode in tension, the test results can be obtained immediately. The instrument adopts electromechanical integration design, and the whole set of instruments is integrated as a whole. Mechanical parts including handles, sensors, leadscrews, and reaction force supports form a "door" structure. At the same time, the measurement display circuit is embedded in the instrument, and the data can be directly observed. The Detector has the characteristics of light weight, labor-saving handle operation, and convenient use.

The main function

Function selection: It is suitable for testing the bonding strength of various materials.

Measurement selection: Select different standard blocks to automatically calculate the intensity value.

Automatic clearing: Automatically eliminate the deviation value after power-on to make the output display a zero value.

Peak hold: In the peak hold state, the maximum tension value is always displayed.

Data storage: The detection value can be stored, and can be recalled and cleared at any time.

Automatic shutdown: with delayed power-off function, prolong battery life. 

Linear correction: 5 correction points can be set to correct the data linearity and improve the detection accuracy.

Strength value measurement: MPa value can be displayed directly.

host X1, positioning frame X1, 50mm drill bit X1, drill pipe X1, charger X1, standard block X9, manual, certificate of conformity, warranty card

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.