XINGHUO XHTJ-10 Carbon Fiber Bonding strength Tester

overview

XHTJ-10 carbon fiber bond strength Tester (abbreviated as Tester) is a new type of testing instrument, which is developed for testing the positive tensile bond strength between carbon fiber sheets and concrete in civil and architectural structures. According to the bond strength and failure mode in tension, the test results can be obtained immediately. This instrument is a satisfactory testing equipment for the design, construction and acceptance of concrete structures reinforced and repaired by pasting carbon fiber sheets. The Detector is designed with electromechanical integration, and the whole set of instruments is integrated as a whole. Mechanical parts including handles, sensors, leadscrews, and reaction force supports form a "door" structure. At the same time, the measurement display circuit is embedded in the instrument, and the data can be directly observed. The Detector has the characteristics of light weight, labor-saving handle operation, and convenient use.

The main function

Function selection: It is suitable for testing the bond strength of carbon fiber cloth.

Measurement options: standard block detection.

Automatic clearing: Automatically eliminate the deviation value after power-on to make the output display a zero value.

Peak hold: In the peak hold state, the maximum tension value is always displayed.

Data storage: The detection value can be stored, and can be recalled and cleared at any time.

Automatic shutdown: with delayed power-off function, prolong battery life. 

Linear correction: 5 correction points can be set to correct the data linearity and improve the detection accuracy.

Strength value measurement: MPa value can be displayed directly.

Digital display host X1, 50 round standard block X6, drilling rack X1, drill X1, charger X1, certificate X1, warranty card X1, instrument case X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.