LINSHANG LS-225-JIJIA hand pressure testing device rack
The LINSHANG LS225 Test Fixture is an Optional accessory of the LS225 platings Thickness Gauge for the measurement of small workpieces such as nails and bolts to reduce measurement errors.
LinShang
LS225-PFS
LS225 + F500
LS225+N1500
LS225 + N1500 + Rack
LS225 + F500 + Rack
LS225
-
Defelsko PosiTector 6000 FNTS3 Coating Thickness Gauge for coatings
$ 2069.00 -
LANDTEK CM8829n paint Thickness Gauge, integrated eddy current paint Thickness Gauge
$ 313.00 -
German EPK F05 probe, thickness range 0~500um
$ 1497.00 -
Linshang LS225 industrial grade Coating Thickness Gauge host, probe needs to be purchased separately
$ 249.00 -
Defelsko F90S split 90 ° right angle probe measurement low headroom area
$ 1049.00
Introduction
In order to meet the demanding precision when measuring the thickness of extremely thin coatings, a test fixture is also provided. The use of this test fixture can greatly reduce the error caused by human operation, especially when measuring small workpieces such as nails and bolts. When using the test fixture to measure small workpieces, it is recommended to remove the small black positioning sleeve at the front end of the probe, and re-calibrate the multi-point on the unpainted standard workpiece before measuring.
LinShang LS225-PFS Probe fixing bracketSpecifications
| LIST | VALUE |
|---|---|
| compatible model | LS225 |
LinShang LS225-PFS Probe fixing bracket Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.