LINSHANG LS-225-JIJIA hand pressure testing device rack
The LINSHANG LS225 Test Fixture is an Optional accessory of the LS225 platings Thickness Gauge for the measurement of small workpieces such as nails and bolts to reduce measurement errors.
LinShang
LS225-PFS
LS225 + F500
LS225+N1500
LS225 + N1500 + Rack
LS225 + F500 + Rack
LS225
-
Defelsko Positector 6000 FJS3 fireproof coating Thickness Gauge 25mm
$ 2068.00 -
Coating Thickness Gauge AMITTARI AC-112H Special magnetic Induction Coating Thickness Gauge
$ 608.00 -
Germany Knix QNix4500 dual-use Coating Thickness Gauge integrated probe 3mm range
Login -
DUBAN DB20-CM211S Split type coating Thickness Gauge, with wire paint film Thickness Gauge
$ 410.00 -
German EPK F1.6 Film Thickness Gauge probe, thickness range 0~1600um
$ 1360.00
Introduction
In order to meet the demanding precision when measuring the thickness of extremely thin coatings, a test fixture is also provided. The use of this test fixture can greatly reduce the error caused by human operation, especially when measuring small workpieces such as nails and bolts. When using the test fixture to measure small workpieces, it is recommended to remove the small black positioning sleeve at the front end of the probe, and re-calibrate the multi-point on the unpainted standard workpiece before measuring.
LinShang LS225-PFS Probe fixing bracketSpecifications
| LIST | VALUE |
|---|---|
| compatible model | LS225 |
LinShang LS225-PFS Probe fixing bracket Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.