RDS Proofing rod 9 #3/8 diameter wire-wound drawdown Bar
RDS9 #Proofing rod is an open wire-wound drawdown Bar with a film thickness of 20.6 μm and made of stainless steel. RDS9 #Proofing rod is suitable for laboratory film proofing in paper, film, inks and other industries.
RDS-
RDS 20 #1/4 "wire-wound Applicator rod film thickness 45.7μm Wire diameter 0.51mm
$ 155.00 -
Japan OSP-20/400 coating rod WFT 20μm coating bar film 400mm
$ 172.00 -
RDS 85G #3/8 "Gap Applicator rod Thick film Spreader rod 194.3μm
$ 172.00 -
Japan OSP-52/250 painting coating bar WFT 52 μm length 250mm
$ 152.00 -
US RDS 0 #1/4 "Applicator rod Film thickness is 0μm
$ 139.00
![]() | ![]() | ![]() |
This RDS9# color scraping stick is an open process winding wire rod, the prepared wet film thickness is 20.6μm, the diameter of the steel wire is 0.23mm, and the effective coating width is 30cm.
United StatesRDS wire rod has two different conventional process coating rods of wire winding type and extrusion type, and there are also coating rods with special processes such as open type and double wire winding type, which are suitable for special coating film experimental scenarios, RDS as a professional coating rod manufacturer imported from the United States, has a history of 80+ years, and its wire rod coaters are well-known in CHINA and are widely used in different subdivided industries.
Open wire rods are one of the special coating rods that reduce clogging and eliminate stitches for higher viscosity coatings. The grooves created by spaced wrap lines are (see picture) and are shallow and allow heavy paint to flow better. The smaller lines create a small break in the paint flow so that the paint can be soaked more completely. Although open wire rods are not as durable as double spools, they are also less expensive.










Optional
RDS 9# 3/8" Applicator rodSpecifications
| LIST | VALUE |
|---|---|
| Production process | open type |
| WFT | 20.6μm |
| diameter | 9.52mm |
| Total length | 400mm |
| application width | 300mm |
| grip width | 50+50mm |
| material | stainless steel |
| Wire diameter | 0.23mm |
RDS 9# 3/8" Applicator rod Packing list
Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- RDS Mayer Rods preparatory passivating film
- One article introduces RDS Applicator rod type and FAQ
- The experimental case of OSP Mayer Rods at inks Moulding [with video]
- Laboratory small coater film video demonstration on Aluminum Panel
- Application of laboratory coater on release paper with glue [video demonstration]
- What problems should I pay attention to when buying a wire rod applicator?
- Frequently Asked Questions for Inventory 2022 Lines, Issue 1
- Mayer Rods VS Film Applicators
- Experimental film coating machine case | Scrape coating slurry on release film
- Pull wire test


9# 3/8"















