CHINA ASR-225E Thermal Shock Test Chamber High and Low Temperature Impact Tester

Introduction

Thermal shock testing machine is used to test material structures or composite materials through a continuous ring of extremely high-low temperatures in an instantThe degree to which it can tolerate in order to test the chemical changes or physical injuries caused by its thermal expansion and contraction in the shortest possible time.

Applicable objects include metals, plastics, rubber, electronics... and other materials, which can be used as the basis or reference for the improvement of its products.

Features

• The Three-Chamber equipment is divided into three parts: high temperature area, low temperature area and test area, and the test product is placed in the test area and the high temperature area during impactOr the temperature of the low temperature zone rushes into the test area for impact, and the test product is static.

• The touch-sensitive graphical operation interface is easy to operate.

• The impact mode uses the air path switching mode to enter the temperature channel into the test area for cold and thermal shock testing.

• In the case of high temperature impact or low temperature impact, the maximum time can reach 999 hours, and the maximum cycle time can reach 9999 times.

• The system can be used as an automatic recirculating engine or manual selective impact, and can set the second or third zone impact and the start of cold, heavy and hot impulse.

• The cooling adopts a binary refrigeration system, the cooling effect is fast, and the cooling method is water-cooled.Light can be tested to impact room temperature

Perform and meet standards and test methods

1. GJB150.5 temperature shock test, 2. GJB360.7 temperature shock test, temperature shock test, 3. GB/T2423.22

Comparison of parameters of thermal shock Test Chamber series

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.