JININGCHAOSHENG TR200 Surface Roughness Tester
JiNingChaoSheng
Introduction of TR200 Surface Roughness Tester
● Menu operation mode
● It has the function of graphic display
● Sensor stylus position indication
● Automatic shutdown with storage function
● Multi-language Operating Mode selection
● High-precision inductive sensor
● 13 roughness parameters can be measured and displayed
● DSP (Digital Signal Processor) is used for data processing and control, with fast speed and low power consumption
● Mechatronics design, small size, light weight, easy to use
● High quality lithium-ion rechargeable battery, high capacity, no memory effect, continuous working time is more than 20 hours
● Connected to the TA series printer, the measurement parameters and contours can be printed
● Standard RS232 interface, which can communicate with PC
● Curved surface sensor can be used to measure the curved surface, small hole sensor to measure the inner hole wall, and groove/deep groove sensor to measure the roughness of the bottom of the groove or step
TR200 Surface Roughness Tester Parameters
Measurement parameters | Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr |
Measuring range | Ra:0.025-12.5μm |
Display range | Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm |
Measuring range | ±20μm、±40μm、±80μm |
Highest display resolution | 0.001μm |
Filtering | RC、PC-RC、GAUSS、D-P |
Sampling length | 0.25mm, 0.8mm, 2.5mm, automatic |
Evaluate the length | 1L-5L (optional), L is the sampling length |
Measure the stroke length | 3L-7L(optional) |
Maximum drive stroke length | 17.5mm/0.71inch |
Minimum drive stroke length | 1.3mm/0.052inch |
Indication error | ≤±10％ |
Variability of the indication | ≤6％ |
Tip angle | 90° |
How it is displayed | 128×64 dot matrix LCD (with backlight) |
Operating Environment | Temperature: 0℃- 40℃, Relative Humidity: <90% |
weight | 440g |
Dimensions | 140×52×48mm |
Basic configuration: main unit, TS100 standard sensor, power adapter, multi-line template, sensor sheath, bracket
Optional : TS110 Curved Surface Sensor, TS120 Small Bore Sensor, TS130 Groove Sensor, TS131 Deep Groove Sensor, TA610 Measurement Platform, TA620 Measurement Platform, TA630 Micro Adjustment Platform, TA631 Micro Adjustment Platform, TA230 Micro Printer, Lateral Adapter, Extension Rod, V-Block, Connector Parts, Driver Connecting Shaft, PC Software
JiNingChaoSheng TR200 Surface roughness meterSpecifications
| LIST | VALUE |
|---|---|
| Measurement parameters | Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr |
| Measurement range | Ra:0.025~12.5μm |
| Resolution | 0.001μm |
| Error of indication | ≤±10％ |
| Indication variability | ≤6％ |
| Sampling length | 0.25Mm | 0.8mm | 2.5mm (Automatic) |
| evaluation length | 1L~ 5L (optional, L is the sampling length) |
| Stroke length | 17.5mm/0.7inch |
| Dimensions | 140*52*48mm |
| Product Weight | 440g |
| Operating Conditions | Temperature: 0 ℃ - 40 ℃, Relative Humidity: < 90% |
| Display range | Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm RS、RSm：1mm，Rmr：0-100%（%Rt），Rsk：0-100% |
| Range | ±20μm、±40μm、±80μm |
| filter | RC、PC-RC、GAUSS、D-P |
| Minimum drive stroke length | 1.3mm/0.052inch |
| tip angle | 90° |
| Display mode | 128 × 64 dot matrix liquid crystal (with backlight) |
JiNingChaoSheng TR200 Surface roughness meter Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Understand the meaning of surface roughness symbols
- Surface Roughness and Assessment Methods of Surface Roughness
- Effect of Surface Roughness on Electrophoresis mass of Cold Rolled Sheet