XIONGFA XF-1636A Apparent Stacking Density Meter
Conform to GB/T1636-2008 standard, dedicated to the measurement of apparent density (pb) of powder or pellets. Designed with 40 ° funnel, the cartridge volume is 100ml, the sampling amount is 110~120ml, the structure is simple, and it is suitable for the determination of Density of plastic materials
XIONGFA
XF-1636A
XF-1636B
-
XIONGFA XF-16913 Natural Stacking Density Meter funnel outflow diameter 12.7mm
$ 347.00 -
JINGXIN JL-A3 Powder Characteristic Tester
$ 957.00 -
XIONGFA XF-13173 Surfactant apparent density (pb) meter, free flow + clump trend powder dual-use
$ 817.00 -
XIONGFA XF-1636A Apparent Stacking Density Meter
$ 458.00 -
XIONGFA XF-13173 Surfactant apparent density (pb) Tester for clumping tendency powders
$ 661.00
Introduction
Plastic material apparent density Tester, the plastic apparent density measurement conforms to the standard of GBT 1636-2008, and is used to test the apparent density of loose materials (powder or pellets) that can flow out of a specified funnel. The products meet the requirements of GB/T3402, GB/T1636 GB/T20022-2005 GB/T13173-2008 and 1636-79 standards.
This method is suitable for measuring the apparent density of powder molding compound, that is, the mass in unit volume, and provides parameters for the packaging of molding compound, the design of mold cavity and extrusion screw.
Main components: base, support frame, funnel, inserting plate, receiver
Receiver volume: 100ml±0.5ml
Sampling volume: 110ml-120ml
XIONGFA XF-1636A Apparent Accumulation Density MeterSpecifications
| LIST | VALUE |
|---|---|
| Main components | Base, support frame, funnel, insert board, receiving cylinder |
| Receiving barrel Volume | 100Ml +/- 0.5ml, diameter 45mm |
| Sampling | 110~120ml |
| Funnel angle | 40° |
| Funnel upper diameter | 56mm |
| Funnel diameter | 33mm |
| Total height | 115mm |
| Meet the standard | K-6721(1966)、GB/T3402、GB/T1636、GB/T20022-2005、GB/T13173-2008、GB/T1636 |
XIONGFA XF-1636A Apparent Accumulation Density Meter Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Material Density Analysis: Density, apparent density (pb) and bulk Density
- Density determination: key performance parameters for the powder coatings and pigment industries