LABTOP MSC-4005W Magnetic stirring high-low temperature reaction bath

Magnetic stirring high-low temperature reaction bath MSC series

The reaction baths that reach low temperature -80°C all use two-stage compressor cascade refrigeration technology, which is powerful and reaches the temperature you need faster. The strong magnetic stir bar is stirred in the tank, and the magnetic stir bar in the reaction vessel rotates synchronously, which can keep the sample temperature uniform and good accuracy for a long time and stably. The strong magnetic stirring forms a vortex in the tank, which is especially suitable for viscosity testing at low temperatures. At the same time, the retractable lid can adjust the size of the caliber to fit the size of the reaction vessel, reduce the volatilization of the refrigerant and the heat exchange with the outside world, and achieve a stable low temperature environment. It achieves a long-term stable low temperature that cannot be achieved by refrigerant liquids such as dry ice.

Features

• Waterproof keyboard design, high-brightness LED display;

• Small size, can be directly placed on the desktop and fume hood for use;

• When alarming, light and sound remind at the same time

• Temperature settings are automatically saved

• The buzzer can be set to silent or audible

• The model with "+" can be circulated externally, providing an economical solution for circulating cooling;

• A variety of operation modes are available, even if the overnight test is interrupted, the experiment can be resumed without one after the power is called, so that the experiment is worry-free.

1) Mode 1: When the power supply is disconnected during the operation of the device, the next power-on device is in the normal stop state, and the setting value can be changed.

2) Mode 2: When the power supply is disconnected during the operation of the device, the next power-on device will run automatically, and the setting value can be changed.

3) Mode 3: When the power supply is disconnected during the operation of the device, the next time the device is powered on, the device will run automatically, and the setting value cannot be changed.

• Pt100 temperature sensor for single- and two-point and multi-point temperature calibration

• Optional intelligent control function: a variety of interfaces (RS485, RS232) to achieve remote communication, control the start and stop of the equipment.

• The serial number of the device can be checked through the software

MSC series

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.