LABTOP HC 30 Immersion thermostatic circulator

Description

The Immersion Thermostat/Controller is a multi-functional heating device that can provide heating, stirring, temperature measurement, temperature control and circulation, which can be used alone or in a variety of special baths (stainless steel baths, transparent polycarbonate baths, plexiglass baths, etc.), and can be easily and quickly installed on any Water Tank with a threaded back clamp to achieve precise temperature control of the sample in the bath, and can be used in combination with a cooling thermostat circulator to achieve a minimum temperature of -20°C. All models are equipped with powerful pressure and suction pumps and comply with the DIN12876 standard safety class III (FL can be used with flammable liquids). The pump adapter can be used for external circulation temperature control, and the cooling coil is configured for connection to a cold water source.

Features

• Small size, the instrument can be easily installed on different Water Tanks through the threaded back clip;

• Powerful pressure/suction pumps;

• Good stability of temperature control;

• Meets safety class III.(FL) in the DIN12876 standard and can use flammable liquids;

• Convenient for internal and external circulation applications;

• High-low temperature alarm function;

• Over-temperature automatic cut-off/anti-dry burning function;

• Low level alarm function;

• Multi-point calibration function;

• When the alarm is raised, the light and sound are reminded at the same time;

• Adjustable safety temperature range, safer to use;

• A variety of communication interfaces can be configured (RS232/USB).

Serial models

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.